B&M 144 Blower and Parts
Thread Starter
Junior Member
iTrader: (1)
Joined: Jan 2007
Posts: 40
Likes: 0
From: Northern Ill
Car: 86 Corvette
Engine: 350
Transmission: 700
Axle/Gears: 3:73 Z51
B&M 144 Blower and Parts
O.K. I'm Gonna sell it ...I went with a powerdyne unit..
What I have is a........
B&M long snout 144 blower
Holley manifold for a 350
Idler Pulley(tensioner)
Holley 750
Boost Gauge
Crank Pulley
Blower belt
Now On the long snout idler bracket was broken and J/B welded in place..I put a U-bolt on it also with no issues.....I would rebuild the Holley but it works fine (that's just me)..I'll include the crank spacer but it has been machined down to fit a corvette (3")The rotors have the .012 clearance and the teflon is fine...No bearing noise....No Issues...This system can be bolted right on and fired up...I also have an Proform Electric Water Pump and Alt(chrome) brackets never used...If interested in these PM me..
For the Compleat Blower Package I would Like to Get 1100.00 OBO...Plus Shipping
Can Take more Pic's this is all I have right now..It was right after I took it off the car..
Paypal is O.K. but you have to cover their fees
What I have is a........
B&M long snout 144 blower
Holley manifold for a 350
Idler Pulley(tensioner)
Holley 750
Boost Gauge
Crank Pulley
Blower belt
Now On the long snout idler bracket was broken and J/B welded in place..I put a U-bolt on it also with no issues.....I would rebuild the Holley but it works fine (that's just me)..I'll include the crank spacer but it has been machined down to fit a corvette (3")The rotors have the .012 clearance and the teflon is fine...No bearing noise....No Issues...This system can be bolted right on and fired up...I also have an Proform Electric Water Pump and Alt(chrome) brackets never used...If interested in these PM me..
For the Compleat Blower Package I would Like to Get 1100.00 OBO...Plus Shipping
Can Take more Pic's this is all I have right now..It was right after I took it off the car..
Paypal is O.K. but you have to cover their fees
Last edited by happydad; Nov 11, 2007 at 04:07 PM. Reason: added more pics/removed S/S and lowerd price
Member
iTrader: (5)
Joined: Jan 2006
Posts: 157
Likes: 0
From: St. Louis
Car: '84 Camaro
Engine: 5.3l TSP 224r
Transmission: TH350 3600 stall
Axle/Gears: LS1 3.23
Re: B&M 144 Blower and Parts
Could you get more pics? Maybe like one of each side, and some close ups of the JB welded idler? Oh, and is the boost gauge included?
Joined: Jul 2005
Posts: 459
Likes: 0
From: Bloomingdale, NJ
Car: 1985 Z28
Engine: 350
Transmission: T-5 5 Spd
Axle/Gears: Built 10bolt w/3.73s
Re: B&M 144 Blower and Parts
Are you willing to seperate the short snout? Does it come with the shaft?
Thread Starter
Junior Member
iTrader: (1)
Joined: Jan 2007
Posts: 40
Likes: 0
From: Northern Ill
Car: 86 Corvette
Engine: 350
Transmission: 700
Axle/Gears: 3:73 Z51
Re: B&M 144 Blower and Parts
----------
Last edited by happydad; Nov 11, 2007 at 04:27 AM. Reason: Automerged Doublepost
Joined: Jul 2005
Posts: 459
Likes: 0
From: Bloomingdale, NJ
Car: 1985 Z28
Engine: 350
Transmission: T-5 5 Spd
Axle/Gears: Built 10bolt w/3.73s
Re: B&M 144 Blower and Parts
OK will do. Can you send me some pics as well?
Last edited by trumps2000; Nov 11, 2007 at 09:06 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
