FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Windsor, ON, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: prototype development cars
FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners. These are brand new, never installed on a car. Runners are 429 new plus shipping and 250 plus shipping for extrude honing. Entrance/Exits of runners are also nicely radiused for better flow. It's like a mirror finish inside these things.
$450 OBO plus shipping.
$450 OBO plus shipping.
#2
Member
Join Date: Jan 2006
Location: Poland, Europe
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird 88
Engine: 406
Transmission: th400
Axle/Gears: 3.50
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
I'll give $200 plus shipping...
(no offence, but for me higher then that is a ripoff)
(no offence, but for me higher then that is a ripoff)
Last edited by Morit; 04-20-2008 at 08:08 PM.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Windsor, ON, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: prototype development cars
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
that's less than the extrude honing cost..
anyone else have an offer that isn't such an insulting lowball?...
anyone else have an offer that isn't such an insulting lowball?...
#4
Member
iTrader: (4)
Join Date: Feb 2008
Location: New Smyrna Beach, FL
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 305
Transmission: 5 Speed
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
Wow.. I paid 450 for a accel lower intake, slp runners, and a ported upper plenum. No offense bro but that is WAY to high.
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Windsor, ON, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: prototype development cars
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
That's great, thanks for your opinion, but these are 429 new and 250 for extrude honing = 670 plus shipping. They are brand new, never installed.
FYI from stealthram.com..
Runners (measured individually)
Stock.......................................203.17 cfm
ACCEL......................................242.02 cfm
Extrude/ACCEL...........................275.83 cfm
I can do 400 plus shipping..
FYI from stealthram.com..
Runners (measured individually)
Stock.......................................203.17 cfm
ACCEL......................................242.02 cfm
Extrude/ACCEL...........................275.83 cfm
I can do 400 plus shipping..
#6
Member
Join Date: Jan 2006
Location: Poland, Europe
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird 88
Engine: 406
Transmission: th400
Axle/Gears: 3.50
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
Why does it looks like only the entrances are honed and not the insides?
It doesnt look like a $250 at all.. (or maybe I see it wrong on the pictures,
correc me and you'll have bigger chances selling it) But nvm..
You know what I could give, otherways - good luck..
It doesnt look like a $250 at all.. (or maybe I see it wrong on the pictures,
correc me and you'll have bigger chances selling it) But nvm..
You know what I could give, otherways - good luck..
#7
Member
iTrader: (2)
Join Date: Aug 2005
Location: Dayton, Ohio
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am
Engine: L98 355
Transmission: 700R4
Axle/Gears: 3.70
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
The problem is you can find this stuff used here and on ebay for alot less. As someone else pointed out, I also snagged a fully ported base, siamesed and ported SLP runners and a fully ported plenum, all beautifully powdercoated and all portmatched for $500 on ebay. The runners had never been used.
We know the stuff costs a fortune new. The issue though is that folks buy this stuff and 80% of the time break the motor, the car, get bored, go a different direction, etc. etc. etc. and want to sell their stuff fast, and you can get it for less than half of retail in many cases. Not saying you won't get what you're asking, but....
Might try ebay....
We know the stuff costs a fortune new. The issue though is that folks buy this stuff and 80% of the time break the motor, the car, get bored, go a different direction, etc. etc. etc. and want to sell their stuff fast, and you can get it for less than half of retail in many cases. Not saying you won't get what you're asking, but....
Might try ebay....
Trending Topics
#8
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Windsor, ON, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: prototype development cars
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
My camera sucks. The finish inside is smooth as glass. It's like a mirror reflection. But I guess it doesn't matter since no one is interested in extrude honed brand new parts. Unbelievable the amount of negative feedback around here when you list something for sale..
#10
Senior Member
Join Date: Jul 2007
Location: Elk Grove Village
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firechicken
Engine: 350 + 30 over, 400 crank
Transmission: autotragic, stalled
Axle/Gears: not a one tire fire, thank god!
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
Uh, wow, yeah, let me know when they go down in price. No offense but I could get the runners for less and do the hone work on my own and spend alot less than you are asking. When you get parts honed, ported, or polished, it doesn't make the part worth more. You have to expect that you will get the same price as a person that didn't do extra work. Sorry. That's the way it is.
#11
Senior Member
iTrader: (1)
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
Wow.. Love it loud..... I feel your pain!!!!! Everybody wants something for nothin...
Stick to your guns if that's what you need ..... know one here know's what kind of financial shape your in......
A year or 2 ago I would have bought "GREAT PARTS" like these for what they're worth and wouldn't have thought twice about it, but have since planned a HSR combo.
Don't be discouraged...... maybe put it up on EBAY theres a greater pool to sell to out there.
Good luck
Stick to your guns if that's what you need ..... know one here know's what kind of financial shape your in......
A year or 2 ago I would have bought "GREAT PARTS" like these for what they're worth and wouldn't have thought twice about it, but have since planned a HSR combo.
Don't be discouraged...... maybe put it up on EBAY theres a greater pool to sell to out there.
Good luck
#12
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
I just had the intake of mine Extrude Honed and the space between the port is much less than i see in yours, they look like stock Accel. I dont see a difference, SOMETHING AIN'T RIGHT............
#13
Member
Join Date: Jan 2006
Location: Poland, Europe
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird 88
Engine: 406
Transmission: th400
Axle/Gears: 3.50
Re: FS: Brand New Accel (Lingenfelter) Extrude Honed Large Tube TPI Runners
You can see on the second picuters that only the firs inch or even less is honed - theres lighter color.. Insides are stock..
Cant find suckers in here
Cant find suckers in here
Thread
Thread Starter
Forum
Replies
Last Post
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM