406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
Thread Starter
Junior Member
iTrader: (1)
Joined: Jan 2000
Posts: 16
Likes: 0
From: Little Rock, Arkansas
406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
I have tried to sell the whole car with no luck, so I am going to part out the drivetrain
406 turn key blower motor, all top of the line
-Lunati 4 bolt billet cap block 4.155 bore clearanced for 4" stroke
-Lunati billet steel crank 3.75 stroke knife edged and pin lightened
-Lunati severe duty pro mod 6" rods
-JE custom made 8.75/1 pistons with tool-steel pins and Childs+Albert gapless rings
-Complete internal balance with heavy metal and fluiddampener balancer
-Custom grind soild roller cam with nod-iron distributor gear, comp-cams roller lifters, comp cams hi-tech pushrods, double roller timing chain, aluminum timing cover
-Airflow Research AFR 210 heads. Pro ported with upgraded springs, titanium retainers, L98 angle plug
-Jesel shaft mounted roller rockers 1.7 ex 1.6 in
-Complete Lingenfelter super ram. Intake ports have been enlarged to match the afr's
-Lingenfelter 58mm billet throttle body, 36lb svo injectors
-Misc: Moroso fbody oil pan, Edelbrock victor waterpump for 88-92 surpentine drive, aluminum valve covers
Motor makes over 550 horsepower naturally aspirated and has less than 1000 miles on it. With a properly set up turbo or blower, 800hp is realistic. No expense has been spared in building over 8k in motor. runs perfect.
$3200.00 firm
Procharger D1 Supercharger
-D1 with upgraded impeller, 3core intercooler, auto specialties custom cog drive as well as 12rib surpentine set-up. All bolts, brackets, fmu, aux fuel pump etc included. Less than 500 miles on it
$2500.00
SpeedPro wideband ecm kit with White-brothers adapter harness for maf cars and 3 bar map system. All plug and play
$500.00
Complete true dual exhaust
-Hooker Super comp ceramic coated headers
-true dual exhaust with dynomax mufflers, custon xpipe
I would like to sell the exhaust complete, but will seperate if need be
$400.00
2 Centerline Convo-pro 15x10 wheels with 2 Mickey Thompson ET street 28x12.5x15 fits 3rd gen polished
$350.00
2 84-87 Corvette rear wheels with 2 Mickey Thompson ET street 26x11.5x16 slicks fits 3rd and 4th gen( you may need a spacer for 3rd gen)
$200.00
Precision Industries Vigilante torque converter
-2900 stall with lock-up for 700r4. I believe it is a multi-disk set-up but I can not find the original paperwork
$225.00
Any questions please email. Car is still together so if you want to hear it run prior to sale, come by. I will accept paypal but would prefer certified funds on the big stuff
Thanks!
406 turn key blower motor, all top of the line
-Lunati 4 bolt billet cap block 4.155 bore clearanced for 4" stroke
-Lunati billet steel crank 3.75 stroke knife edged and pin lightened
-Lunati severe duty pro mod 6" rods
-JE custom made 8.75/1 pistons with tool-steel pins and Childs+Albert gapless rings
-Complete internal balance with heavy metal and fluiddampener balancer
-Custom grind soild roller cam with nod-iron distributor gear, comp-cams roller lifters, comp cams hi-tech pushrods, double roller timing chain, aluminum timing cover
-Airflow Research AFR 210 heads. Pro ported with upgraded springs, titanium retainers, L98 angle plug
-Jesel shaft mounted roller rockers 1.7 ex 1.6 in
-Complete Lingenfelter super ram. Intake ports have been enlarged to match the afr's
-Lingenfelter 58mm billet throttle body, 36lb svo injectors
-Misc: Moroso fbody oil pan, Edelbrock victor waterpump for 88-92 surpentine drive, aluminum valve covers
Motor makes over 550 horsepower naturally aspirated and has less than 1000 miles on it. With a properly set up turbo or blower, 800hp is realistic. No expense has been spared in building over 8k in motor. runs perfect.
$3200.00 firm
Procharger D1 Supercharger
-D1 with upgraded impeller, 3core intercooler, auto specialties custom cog drive as well as 12rib surpentine set-up. All bolts, brackets, fmu, aux fuel pump etc included. Less than 500 miles on it
$2500.00
SpeedPro wideband ecm kit with White-brothers adapter harness for maf cars and 3 bar map system. All plug and play
$500.00
Complete true dual exhaust
-Hooker Super comp ceramic coated headers
-true dual exhaust with dynomax mufflers, custon xpipe
I would like to sell the exhaust complete, but will seperate if need be
$400.00
2 Centerline Convo-pro 15x10 wheels with 2 Mickey Thompson ET street 28x12.5x15 fits 3rd gen polished
$350.00
2 84-87 Corvette rear wheels with 2 Mickey Thompson ET street 26x11.5x16 slicks fits 3rd and 4th gen( you may need a spacer for 3rd gen)
$200.00
Precision Industries Vigilante torque converter
-2900 stall with lock-up for 700r4. I believe it is a multi-disk set-up but I can not find the original paperwork
$225.00
Any questions please email. Car is still together so if you want to hear it run prior to sale, come by. I will accept paypal but would prefer certified funds on the big stuff
Thanks!
Junior Member
iTrader: (5)
Joined: Apr 2007
Posts: 78
Likes: 0
From: jacksonville, NC/campbellsville Ky
Car: 2014 2SS/RS
Engine: LS3
Transmission: TR6060
Axle/Gears: 3.55
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
i'm interested in the exhaust if you can get me a couple pics.
Senior Member
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
PM sent. Can you provide some pics?
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
I am interested in the motor,supercharger,and ecm kit for my 87 Iroc, I live in vt so I would need to have it shipped, I know it would be expensive but the only way, also why are you selling? pics? Please sen dpics and response to erin_countryhome@msn.com
Last edited by smiths87t/a; Jul 8, 2008 at 03:48 PM.
Junior Member
Joined: May 2003
Posts: 31
Likes: 0
From: Illinois
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
I'm very interested in the Procharger setup. Do you have the part number for the supercharger? If you have a few pics of it installed on your car that would be helpful too. My new email address is kovacshome@comcast.net. Thanks
Trending Topics
Joined: Jan 2003
Posts: 109
Likes: 3
From: Marblehead OHIO
Car: 1984 MSE #52
Engine: 350
Transmission: TH700
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
How many miles and # of splines on the Vigilante ? Thanx
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
Do you have a part number and pics for the headers? How much for them shipped to 53154?
</div>
</div>
Member
iTrader: (2)
Joined: Aug 2006
Posts: 443
Likes: 2
From: Collegeville PA
Car: 91 Z-28
Engine: 360TPI
Transmission: PA Racing 700r4
Axle/Gears: 3:73
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
Junior Member
Joined: Jun 2002
Posts: 57
Likes: 0
From: Virginia Beach
Car: 89IROC
Engine: Forged 355 AFR195
Transmission: 700R4 Vigilante Converter
Axle/Gears: Strange 12 bolt 3.73
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
can you link me to the details about the ECM?
thanks
thanks
Thread Starter
Junior Member
iTrader: (1)
Joined: Jan 2000
Posts: 16
Likes: 0
From: Little Rock, Arkansas
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
Motor is back for sale. No Paypal for the motor sale. Certified funds only.
I will be glad to drop off the motor for shipping. It is pallated and ready to go.
I will be glad to drop off the motor for shipping. It is pallated and ready to go.
Thread Starter
Junior Member
iTrader: (1)
Joined: Jan 2000
Posts: 16
Likes: 0
From: Little Rock, Arkansas
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
ConvoPro Wheels and tires are sold.
Motor, wide band kit, exhaust, converter, and corvette wheels still available.
Motor, wide band kit, exhaust, converter, and corvette wheels still available.
Member
Joined: Oct 2006
Posts: 239
Likes: 0
From: Connecticut
Car: 1987 IrocZ
Engine: lb9
Transmission: 5 spd
Axle/Gears: factory 9 bolt with 3.45 gears
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
Who built you engine? Also, do you have any pics of it?
Thanks very much.
Thanks very much.
Junior Member
Joined: May 2003
Posts: 31
Likes: 0
From: Illinois
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
Just to let everyone know, I bought the Procharger from Mike and have since received it. It's just as nice as he described. He's a straight up guy, so if you're looking for any of the items that are still for sale, I wouldn't be at all scared. Just thought I'd drop a post to let everyone know that he is very legit, and I am 100% happy with our transaction.
Thread Starter
Junior Member
iTrader: (1)
Joined: Jan 2000
Posts: 16
Likes: 0
From: Little Rock, Arkansas
Re: 406 blower motor All top of th line parts,Procharger D1 w 3 core cog drive, more
And then ther were none....
All big things sold...kibbles and bits left..I am listing my car next.
Thanks for all the pm's
Mike
All big things sold...kibbles and bits left..I am listing my car next.
Thanks for all the pm's
Mike
Thread
Thread Starter
Forum
Replies
Last Post
