Isky cam
Thread Starter
Member
iTrader: (25)
Joined: Apr 2006
Posts: 326
Likes: 0
From: Sterling, IL
Car: 1988 IROC
Engine: 305 TPI
Transmission: TH-700r4
Axle/Gears: 3.73
Isky cam
Less than 250 miles on it. I went to a turbo and needed different cam specs.
$50 shipped in the USA.
it is a 292 mega hydralic 108 lobe centerline.
it can be used with either hydralic lifters or full rollers.
Not even completely broken in yet.
$50 shipped in the USA.
it is a 292 mega hydralic 108 lobe centerline.
it can be used with either hydralic lifters or full rollers.
Not even completely broken in yet.
Last edited by cpears; Jul 23, 2008 at 10:22 PM.
Thread Starter
Member
iTrader: (25)
Joined: Apr 2006
Posts: 326
Likes: 0
From: Sterling, IL
Car: 1988 IROC
Engine: 305 TPI
Transmission: TH-700r4
Axle/Gears: 3.73
Re: Isky cam
it is a 292 mega hydralic 108 lobe centerline.
it can be used with either hydralic lifters or full rollers.
it can be used with either hydralic lifters or full rollers.
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Isky cam
Isky #201292
Camshaft, Hydraulic Flat Tappet, Chevy, Small Block,
Sportsman classes; 3/8-1/2 mile banked tracks.
Any carburetor. RPM-Range (2800-7000)
Valve Lift (.505 .505) Valve Lash hot (.000 .000)
Advertised Duration 292/292, Duration @ 050 (244 244)
LC 106
Not roller cam
Camshaft, Hydraulic Flat Tappet, Chevy, Small Block,
Sportsman classes; 3/8-1/2 mile banked tracks.
Any carburetor. RPM-Range (2800-7000)
Valve Lift (.505 .505) Valve Lash hot (.000 .000)
Advertised Duration 292/292, Duration @ 050 (244 244)
LC 106
Not roller cam
Last edited by vetteoz; Jul 23, 2008 at 10:56 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
