Coming off my 383 on or before Oct 12th.
Approx 1200 miles on them.
215cc intake / 72cc combustion chambers
2.050 intake valve
1.600 exhaust valve
Angle plugs (clears hooker 2210 headers)
Parimeter or centerbolt valve cover compatability
POR-15 Chevy Orange Painted
Car runs fine right now.
Available on or before Oct 12th.
$650
Approx 1200 miles on them.
215cc intake / 72cc combustion chambers
2.050 intake valve
1.600 exhaust valve
Angle plugs (clears hooker 2210 headers)
Parimeter or centerbolt valve cover compatability
POR-15 Chevy Orange Painted
Car runs fine right now.
Available on or before Oct 12th.
$650
Member
Do they come assembled or bare? How much for them bare?
650 is for the pair, unassembled. There are ZERO issues with these. They go for about 800 unassembled new. If you want them I'll look at how much shipping is and see if I can knock the price down after including shipping. Shipping heads is sometimes around $90 depending on where their going.
I'm getting rid of these because I'm going with aluminum heads and a smaller combustion chamber.
I'm getting rid of these because I'm going with aluminum heads and a smaller combustion chamber.
Member
No offense but summit has them listed as 675.00 new unassembled,
No offense taken, you mind sending me the link? I have a feeling your looking at per piece price and not a pair. I could be wrong. If I am I'm certainly not looking at getting a close to new price seeing as the heads are used.
I went and looked for myself and you were right, I don't know what I looked at before, possibly a platinum series head. Knowing this now the corrected price for the pair (unassembled) is: $550 + 1/2 of the shipping (I cover the other 1/2).
I went and looked for myself and you were right, I don't know what I looked at before, possibly a platinum series head. Knowing this now the corrected price for the pair (unassembled) is: $550 + 1/2 of the shipping (I cover the other 1/2).
Country, no. The valves are too big I believe. I do have however the 383 block from my engine that these heads are coming off of. The block also has only 1200 or so miles on it. FULLY prepped (stroker clearanced) 4bolt, 1pc rear seal, 4.030 bore, decked, and a moroso ceramic block fill up to the first freeze plugs. Engine and heads are coated with POR-15 Engine paint, Chevy Orange. Pics are in my photobucket album:
http://s6.photobucket.com/albums/y205/AC1LE/
http://s6.photobucket.com/albums/y205/AC1LE/
Price for the heads is 500 unassembled (shipped) and 850 assembled (shipped). I'm going a different route. Heads were new and only have about 1200 miles on them.
So I need to sell this set of ASSEMBLED Dart Iron Eagle 215cc/72cc heads. I have to sell them assembled because the valves are a 2.050 and my new heads are 2.020. Assembled is heads (castings), valves, springs, spring retainers,guide plates,rocker studs. $675 obo +1/2 shipping (I'll cover the other 1/2)
Member
Are these the platinum heads?
Thse are not, these heads are angle plug Iron Eagles.
Need these gone guys. Anyone interested PM me. These were great heads, completely assembled minus pushrods and rockers. I'm going in another direction.
Junior Member
are the studs press fit or threaded? i also have a set of 2.02 valves all 16 if ur interested in a partial trade i paid about 150 for em nd never got to use em
The studs are threaded 3/8 I believe. I can double check. Actually, I'm almost certain because I know their not 7/16.