Big COMP Hyd Roller Cam
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 3,155
Likes: 2
From: Louisville, Ky
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Big COMP Hyd Roller Cam
Cam is hydraulic roller with about one hour of run time. In great shape but I went bigger.
I still have the cam card...it is Comp's 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050
If more info is needed please ask.
$200 obo
I still have the cam card...it is Comp's 3315/3316 on a 112 LSA.
.510/.520 lift
230/236 @ .050
If more info is needed please ask.
$200 obo
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 3,155
Likes: 2
From: Louisville, Ky
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big COMP Hyd Roller Cam
Both Gen I and LT1. For LT1 use you would need to pull out the shorter dowel pin and replace it with a longer LT1 pin, that's it.
Standard firing order.
The cam is perfect, the only thing you will notice is slight discoloration on a couple of the lobes seen in the last pic.
Standard firing order.
The cam is perfect, the only thing you will notice is slight discoloration on a couple of the lobes seen in the last pic.
Last edited by CamarosRUS; Feb 15, 2009 at 01:23 AM.
Trending Topics
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 3,155
Likes: 2
From: Louisville, Ky
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big COMP Hyd Roller Cam
$150 shipped to Croatia is just not going to work. I'm sure the shipping will be $150.
Junior Member
iTrader: (1)
Joined: Dec 2006
Posts: 53
Likes: 0
From: Zagreb, Croatia
Car: C4 Corvette
Engine: l-98
Transmission: 700r4
Member
Joined: Feb 2008
Posts: 219
Likes: 0
From: Antelope Valley, Ca...So.Cal.
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Big COMP Hyd Roller Cam
still have the cam?
any cam # from comp so I can look up the info on it?
any cam # from comp so I can look up the info on it?
TGO Supporter
Joined: Jul 2003
Posts: 4,803
Likes: 2
From: Grand Rapids, MI
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Re: Big COMP Hyd Roller Cam
Don't know if he has it or not, but I can attest to the fact that the numbers he has provided are Comp's Extreme Energy lobe profiles (3315 being the int lobe, 3316 being the exh) ground on a custom blank. Cam is designed for custom EFI friendliness.
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 3,155
Likes: 2
From: Louisville, Ky
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Big COMP Hyd Roller Cam
Bored Morit? Thanks for the bump.
This might work in a retrofit block but I am not sure. It is designed for factory hyd roller aps with the cam plate but I do not see why it would not work in a retro application with the correct cam button.
This might work in a retrofit block but I am not sure. It is designed for factory hyd roller aps with the cam plate but I do not see why it would not work in a retro application with the correct cam button.
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
Aug 2, 2019 11:12 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
Sep 1, 2015 04:32 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM