I had posted this engine as a combo with a trans but had no luck. So i am going to part it out. All the parts besides the heads have less than 300 miles on them. you can hear it run at http://www.youtube.com/watch?v=Ayr0FR0q_Pc pm me your offers and your email for pics.

the parts for sale are as follows:

650 demon mech sec $360 obo
edel rpm air gap intake $150
holley systemax II aluminum heads $650
CC 1.6 roller rockers $225
CC roller lifters $150
hardened pushrods can't remember the brand $make offer
comp cams 276 hr cam $225
speedpro flat top pistons $make offer
summit brand harmonic balancer $make offer
double roller timing chain $make offer
balanced rotating assy $make offer
hooker 2210 long tube headers. $225

 

How many miles on heads?

 

I cant remeber exactly how many miles are on them, but I want to say that when I bought them they had 1500 and I put around 300 so they should be around 1800. Before I installed them, I had a machine shop on base check them out and they said they were good and the spring rate still matched the factory specs.

 

i call the headers. pm sent

 

pm sent for the cc roller lifters and push rods

 

pm replied.

 

aare the headers Ceramic Coated?

 

No, they are not ceramic coated. Thanks

 

Are the heads still available if so can you send some pictures to yagga001@yahoo.com

 

have you already got it a part? how much did you want for the motor and tranny all together?

 

?

 

what's the part# on the heads?

 

You guys did notice that this listing is from 2009 - right?

 

Yeah i noticed after i posted question but couldnt delete messege so i just put a question mark.