have a Vic Jr. been converted to efi. Injector bungs underside need to be finish ported.\/ smoothed out. (prob. an hour left tops)

Have fuel rail stock that needs cut to length and drilled for injectors.

Have LS1 throttle body. You would need a 90* elbow.

If your looking at this then you know what your doing/need.

Just want it outa here. I ended up uing a 383lt1 I had around. So my log your gain. I DONOT wanta take this with me whe we move on the 29th.


$150shipped on all. http://www.cecoatings.com/images/Car...cJrConversion/

 

How were you going to secure the fuel rails to the intake? Those bungs are for the standard GM/Ford injectors? I have some bungs and a Team G that I was going to adapt, but i may be time and money ahead with yours.

 

Yes, standard gm/ford injectors.

never got around to the rails because I went with using ,my lt1

Once I had the rails done and drilled Woulda did something like this.
http://static.racingjunk.com/36/ui/2...r-cylinder.jpg

 

Thanks for the photo. May i have Victor Jr #? Are all the threaded holes in good shape?

 

let me run down and look for the #.

Yes all bolt holes are good. Intake is new just been collecting dust for a awhile. Price is low becaue I just want it outa where before we move on Wed. if its not it will be packed in a box and god who knows when taken out.

 

#2975