[KY] For Sale: 3rd and 4th gen F-Body, and LS parts
For Sale: 3rd and 4th gen F-Body, and LS parts
I am cleaning out my addict and getting rid of un-needed parts. There are 3rd, 4th and LS parts I am selling. If you are interested in anything pm me and I can get you more info and pics.
NEW LS Custom Grind CAM Motion cam duration 226.4/232.6, lift .575/.588, LSA- 112 $300
98 LS1 Intake $50
3rd gen drum brake complete rear end with I believe 3.73 gears $150
3rd gen 15"X 7" aluminum Pontiac wheels $125
4th gen silver 5 spoke Camaro 16x8” wheels $175
82-84 TA taillights right & left $80
85-90 TA taillights right, center, & left $100
2 used BFG G- Force TA KDW 225/45/18 very low miles (less then 2k) $100
2 used BFG G- Force TA Drag Radials 275/38 18 with only 3 passes on them and very few miles (less then 2k) $150
Make reasonable offer on stuff bellow:
3rd gen large pin driver side T-Top
Rear 3rd gen TA wing (early small non-wrap around style)
Miss. 3rd gen interior panels
3rd gen bare dash
4th gen LS stock axels
Stock LS flywheel
Stock 4th gen 6 speed trans. Crossmember
4th gen stock 3.42 gears
LS stock Manifolds, Y Pipe with both cats.
C5 Z06 LS6 Manifolds
LS motor mount pedestals
4th gen TA body wiring harness
4th gen factory Radiator and Electric Fans
4th gen factory AC Condenser
4th gen LS front end parts: Struts w/Springs, LS K Member, Power rack, Spindles, A-Arms
I am also thinking about removing my air ride kit and tubular A-Arms and going back to coil springs, I am going to leave it on till I have a buyer for the system. It will include complete Air Ride Technologies kit for 3rd gen F bodies with all the paper work and Spohn tubular lower front A-Arms $1500.
NEW LS Custom Grind CAM Motion cam duration 226.4/232.6, lift .575/.588, LSA- 112 $300
98 LS1 Intake $50
3rd gen drum brake complete rear end with I believe 3.73 gears $150
3rd gen 15"X 7" aluminum Pontiac wheels $125
4th gen silver 5 spoke Camaro 16x8” wheels $175
82-84 TA taillights right & left $80
85-90 TA taillights right, center, & left $100
2 used BFG G- Force TA KDW 225/45/18 very low miles (less then 2k) $100
2 used BFG G- Force TA Drag Radials 275/38 18 with only 3 passes on them and very few miles (less then 2k) $150
Make reasonable offer on stuff bellow:
3rd gen large pin driver side T-Top
Rear 3rd gen TA wing (early small non-wrap around style)
Miss. 3rd gen interior panels
3rd gen bare dash
4th gen LS stock axels
Stock LS flywheel
Stock 4th gen 6 speed trans. Crossmember
4th gen stock 3.42 gears
LS stock Manifolds, Y Pipe with both cats.
C5 Z06 LS6 Manifolds
LS motor mount pedestals
4th gen TA body wiring harness
4th gen factory Radiator and Electric Fans
4th gen factory AC Condenser
4th gen LS front end parts: Struts w/Springs, LS K Member, Power rack, Spindles, A-Arms
I am also thinking about removing my air ride kit and tubular A-Arms and going back to coil springs, I am going to leave it on till I have a buyer for the system. It will include complete Air Ride Technologies kit for 3rd gen F bodies with all the paper work and Spohn tubular lower front A-Arms $1500.
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: For Sale: 3rd and 4th gen F-Body, and LS parts
Can you pull the cover and verify the posi and gears? If it is correct I want it, but Its a pretty good drive so I would like to make sure.
Thanks,
Jeremy
Thanks,
Jeremy
Trending Topics
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: For Sale: 3rd and 4th gen F-Body, and LS parts
You still wanting to sell this stuff, or is it already sold?
Still interested in rear, and would take the tires too.
Still interested in rear, and would take the tires too.
Re: For Sale: 3rd and 4th gen F-Body, and LS parts
I am sorry for the delay, the rearend is at my grandfathers farm and I was unable to get out there due to selling my TA (I got distracted). I am (for sure) going this weekend, if you could give me till later Saturday I will get the info to you. If you will pm me you email I will send pics of it when I go.
The rear tires are sold but, I still have the fronts and would sell them for $50.
The rear tires are sold but, I still have the fronts and would sell them for $50.
Re: For Sale: 3rd and 4th gen F-Body, and LS parts
Sorry for the wait, you can view pics and the gear numbers
http://www.picturetrail.com/sfx/album/view/21394488
It is not a limited slip, looks like a one wheel deal. If you are intersted let me know, make me an offer.
http://www.picturetrail.com/sfx/album/view/21394488
It is not a limited slip, looks like a one wheel deal. If you are intersted let me know, make me an offer.
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
Jan 28, 2016 09:58 PM





