misc. engine parts
Thread Starter
Junior Member
iTrader: (2)
Joined: Feb 2010
Posts: 18
Likes: 0
From: Tuscaloosa, Alabama
Car: 83 t/a , 89 Formula
Engine: t/a-455 Olds, formula 305
Transmission: soon to be 4 speed, 700r4
Axle/Gears: 2.77, 3.23
misc. engine parts
305 TBI intake, throttle body, computer, from 89 Firebird make offer
500cfm (1404) Edelbrock Performer carb. $50 shipped
600cfm (1850) Holley carb needs rebuilding $35 shipped
Holley street dominater single plane intake for pre 86 motors but is drilled for 87 and up $100 or trade for 87 /up dual plane intake without EGR
torque arm bar, rear trailing arms, front a-arms, 4 springs,front & rear sway bar, steering links, caster & chamber mounts all suspension from 89 Formula w/ ws6 suspension, make offer
struts, calipers, spindles, dust shields, car had 15" wheels, make offer
500cfm (1404) Edelbrock Performer carb. $50 shipped
600cfm (1850) Holley carb needs rebuilding $35 shipped
Holley street dominater single plane intake for pre 86 motors but is drilled for 87 and up $100 or trade for 87 /up dual plane intake without EGR
torque arm bar, rear trailing arms, front a-arms, 4 springs,front & rear sway bar, steering links, caster & chamber mounts all suspension from 89 Formula w/ ws6 suspension, make offer
struts, calipers, spindles, dust shields, car had 15" wheels, make offer
Thread Starter
Junior Member
iTrader: (2)
Joined: Feb 2010
Posts: 18
Likes: 0
From: Tuscaloosa, Alabama
Car: 83 t/a , 89 Formula
Engine: t/a-455 Olds, formula 305
Transmission: soon to be 4 speed, 700r4
Axle/Gears: 2.77, 3.23
Thread Starter
Junior Member
iTrader: (2)
Joined: Feb 2010
Posts: 18
Likes: 0
From: Tuscaloosa, Alabama
Car: 83 t/a , 89 Formula
Engine: t/a-455 Olds, formula 305
Transmission: soon to be 4 speed, 700r4
Axle/Gears: 2.77, 3.23
Re: misc. engine parts
Also have a Sealed Power speed pro hydraulic cam (never used)
part # is CS-1015R believe it is for a BBC (not sure) not able to find much info about it only
((((Chevy 427 Corvette with 390hp and 440 ft-lbs of torque. This engine features the following parts:
part # is CS-1015R believe it is for a BBC (not sure) not able to find much info about it only
((((Chevy 427 Corvette with 390hp and 440 ft-lbs of torque. This engine features the following parts:
- Steel crank
- GM rods
- ARP rod bolts
- GM oval port heads
- 2.19"x1.72" valves
- GM block-bored-decked-honed
- Speed-pro 284`-.519" lift cam (CS-1015R)))))))
Last edited by t/a formulas; Feb 24, 2010 at 10:33 AM.
Member
iTrader: (2)
Joined: Feb 2000
Posts: 466
Likes: 0
From: Robbinsville NJ
Car: 88 IROC
Engine: 350
Transmission: auto
Thread
Thread Starter
Forum
Replies
Last Post
