hey guys im parting two 85 Z28's. there is a lot of good parts, 9/10 condition fiberglass crossfire hood, digital guages for 82-89, doors, hatches, front quarter panels, 2 sets of rims, there is so much stuff. I will have the cars at my house a little later this month so i need to know what people need cause if nobody needs the parts they are going with the car to the scrapyard. Im not allowed to have these cars at my place very long which is why im bringin this up ahead of time, so let me know what you need!

also im selling my 3.1 V6 and its pretty much brand new 700r4 tranny

im not trying to make a whole ton of money on all this so im gonna be sellin it cheap, if u need something shipped ill ship it as long as you pay shipping same goes with delivering, ill deliver if you pay gas (I live in Fox Island,WA)

 

Are either one of these cars carburated? If so, do you have the cold air flex hose ( duct work) that goes from the air cleaner to the core support.

Thanks, Mike

 

yes the car is carburated, im doin a motor swap, so i am putting the motor into my car and then im going to convert it to TPI, so yes i will have the flex hose

 

do the doors have power locks and windows? are there any dents in the passenger door? is the window tinted?

 

i know one car has power windows/doors, and im puttin that stuff into my doors, and im not sure if the other car does, but i will have 3 passenger doors and none have dents

 

What do you mean "digital gauges" what company made them, any pics? Price?

 

im not 100% sure but they look like they are dakota digital guages, and they are $645 brand new, a guy called earlier and he said he might want them so ill let ya know if he ends up buying them

 

Are either one of the cars non ac? I need a non ac heater box cover. If so, how much shipped to 46975?

 

will you cut the floor pan pieces?

 

Either of them have the 305? Rochester 4BBL Carb?

 

i can cut the floor pieces, depends on how much you want for them, cause im plannin on scrapping the car shells this weekend, so ill only do it if i can get a decent amount for them and i need to know exactly what section you need.

yes one is a 305 w/ 4bbl im puttin the motor into my car and later this month im converting it to TPI so i will be selling all the carb stuff

 

ill have pics up soon

 

what kind of carb is it?

 

im not 100% sure, i think its a quadrajet? im pretty sure its the same as the stock one for the 305 only its newer, cause he had replaced the stock one

 

howre the interiors? looking for some nice black seats!

also pics of the crossfire hood?

 

hood is sold and black seats are now in my RS, so im not going to sell them unless i can find some leather racing seats to take thier place

 

The mechanic snapped the Tee fitting off the top of my air diverter valve. I'll either take the whole thing or just the little fitting if we can decide if it will fit my engine. It's on the passenger side front corner of the engine and the Tee is on the top front of the unit. I can take a picture of it if need be.

I'm new to this board so I am not sure about how the messages work to get us together, but I can give you a call or email you.
thanks, Greg

Greg

 

yes please take a picture

 

wouldnt by chance have a 19 tooth white driven speedo gear would you?

 

spindles driver and pass? shipped 32164

 

can you email pics of wheels? truckie707@gmail.com

 

i believe a 19 tooth would be a drive gear not a driven and 19 tooths are green i believe but no i dont have one

 

i have the carb, its not the stock one, pretty new cause it had been replaced, its the oem replacement

 

I found one from a local junkyard, thanks anyway.
Greg