[Sold] sold
Thread Starter
Want a title? Post!
Joined: Jan 2010
Posts: 0
Likes: 0
sold
custom dual drilled for early and late. drilled for direct port nitrous, rails, throttle body and manifold all powder coated. Accel 48 lb injectors. old school tunnel ram converted to mpfi. areomotive tsunami fuel pump, distributor included! 900 obo call 541-290-1152 leave message. located in north bend Oregon
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Last edited by flyinryanp; Jan 21, 2011 at 09:48 PM. Reason: sold
Thread Starter
Want a title? Post!
Joined: Jan 2010
Posts: 0
Likes: 0
Thread Starter
Want a title? Post!
Joined: Jan 2010
Posts: 0
Likes: 0
Thread Starter
Want a title? Post!
Joined: Jan 2010
Posts: 0
Likes: 0
Re: sbc custom mpfi
yes thats the stock tpi bracket.
its just a stock tpi tb but it is poweder coated( really does need a 58mm)
it has not been pressure tested but came off a running vehicle.the nitrous ports are right next to the injectors ill try to get a better pic and post it.the pump is pretty much new(still have box) maybe 5 min.
ports look like they are closest to a 1205 gasket. the manifold has ports for all stock sensors.the manifold is aluminum
its just a stock tpi tb but it is poweder coated( really does need a 58mm)
it has not been pressure tested but came off a running vehicle.the nitrous ports are right next to the injectors ill try to get a better pic and post it.the pump is pretty much new(still have box) maybe 5 min.
ports look like they are closest to a 1205 gasket. the manifold has ports for all stock sensors.the manifold is aluminum
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: sbc custom mpfi
still for sale?
Trending Topics
Supreme Member
Joined: May 2005
Posts: 1,057
Likes: 3
From: Malvern, Arkansas
Car: 90 IROC 2-92 Zs blk vert & prpl
Engine: stealth ram brodix track 1 ful port
Transmission: 700r4 4l80e
Axle/Gears: iroc 375 lokr 92 Z 277 pos vert 327
Re: sbc custom mpfi
Need pictures of the intake ports and the inside with the plenum off of it. Looks similar to a stealth ram and they are much cheaper.
Thread Starter
Want a title? Post!
Joined: Jan 2010
Posts: 0
Likes: 0
Re: sbc custom mpfi
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
it basically is a stealth ram the unit is one piece, and i dont see how the stealth ram is cheaper its basically the same price i have up there if you break it down.
fuel pump is 319.95 new
accel 48 lb injectors are 400 new
powdercoating and the manifold is ready for direct port nitrous
a stealth ram with fuel rails and no throttle body is 550.
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: sbc custom mpfi
Would you sell it without the TB, injectors and dizzy? Maybe even without the pump?
Supreme Member
Joined: May 2005
Posts: 1,057
Likes: 3
From: Malvern, Arkansas
Car: 90 IROC 2-92 Zs blk vert & prpl
Engine: stealth ram brodix track 1 ful port
Transmission: 700r4 4l80e
Axle/Gears: iroc 375 lokr 92 Z 277 pos vert 327
Re: sbc custom mpfi
So there is no way to get inside of it and port it. Do you know what it flows? What size are the ports 1205, 1206? How much for just the intake with fuel rails? I have several injectors, throttle bodys, walbro pumps, distributors, etc so I don't need any accessories.
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: sbc custom mpfi
So I ask you to split it up and sell me just the intake, I get a no and now you traded it?????
Thread Starter
Want a title? Post!
Joined: Jan 2010
Posts: 0
Likes: 0
Re: sbc custom mpfi
yeah sorry i figured a fully polished super ram with 24 lb injectors and bbk rail thats been ported was worth more and would sell quicker. i can get 1100 just for the manifold cant really pass that deal up but the super ram is now for sale see this listing https://www.thirdgen.org/forums/engi...super-ram.html
Thread
Thread Starter
Forum
Replies
Last Post
92rsvortec350
Engine/Drivetrain/Suspension Parts for Sale
19
Oct 9, 2015 09:39 AM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 25, 2015 03:51 PM
Night rider327
Exterior Parts for Sale
0
Sep 25, 2015 04:23 AM
pmacfadden
Camaros for Sale
0
Sep 17, 2015 01:06 PM
