[KY] 406 High Flow TPI Build
Thread Starter
Junior Member
Joined: Apr 2006
Posts: 52
Likes: 0
From: Fort Thomas KY
Car: 89 GTA
Engine: 406
Transmission: 700 R4
406 High Flow TPI Build
Pro Comp Aluminum heads 202 valves, assembled, and steam holds drilled with ARP Head Bolts, basic black valve covers: $700
Harland Sharp Roller Rockers 1.5 Ratio: $100
400 two bolt block .030 over, Speed Pro Forged Dished Pistons (9.5-1), Reconditioned Rods with ARP Bolts, Camaro Oil Pan, Mildon Oil Pump driver, double roller timing chain/cover/pointer, Externally balanced 153 and 168 flex plates with harmonic balancer: $450
Comp Cams Computer Cam (12-262-4) TPI friendly and lifters: $150
Edelbrock Ported TPI Base, SLP Ported Runners top of ports are siamesed, Siamesed Ported Plenum: $650
Heads, block, cam/lifters, and pistons have less than 500 miles, spun #3 rod bearing. Have receipts for parts and machine work
All prices are negotiable, make an offer.
I always have trouble posting pictures but I can email them to you.
Don't check Thirdgen often but email Randall2231@yahoo.com or call anytime 859-816-9309
Thanks
Harland Sharp Roller Rockers 1.5 Ratio: $100
400 two bolt block .030 over, Speed Pro Forged Dished Pistons (9.5-1), Reconditioned Rods with ARP Bolts, Camaro Oil Pan, Mildon Oil Pump driver, double roller timing chain/cover/pointer, Externally balanced 153 and 168 flex plates with harmonic balancer: $450
Comp Cams Computer Cam (12-262-4) TPI friendly and lifters: $150
Edelbrock Ported TPI Base, SLP Ported Runners top of ports are siamesed, Siamesed Ported Plenum: $650
Heads, block, cam/lifters, and pistons have less than 500 miles, spun #3 rod bearing. Have receipts for parts and machine work
All prices are negotiable, make an offer.
I always have trouble posting pictures but I can email them to you.
Don't check Thirdgen often but email Randall2231@yahoo.com or call anytime 859-816-9309
Thanks
Last edited by formula; Jul 4, 2011 at 09:58 PM.
Supreme Member
Joined: May 2005
Posts: 1,058
Likes: 4
From: Malvern, Arkansas
Car: 90 IROC 2-92 Zs blk vert & prpl
Engine: stealth ram brodix track 1 ful port
Transmission: 700r4 4l80e
Axle/Gears: iroc 375 lokr 92 Z 277 pos vert 327
Re: 406 High Flow TPI Build
Interested in the block and heads. Are the heads the 220 port angle plug or what? How would I get the parts to Arkansas and what would you trade for?
Want a title? Post!
iTrader: (1)
Joined: Mar 2011
Posts: 0
Likes: 0
From: TUCSON AZ
Car: 88 IROC-Z28
Engine: Monster 355
Transmission: Borg Warner Super T10
Axle/Gears: 28 spline, locker, 3.42s
Re: 406 High Flow TPI Build
rocker stud diameter? if they are 7/16" im interested
Trending Topics
Senior Member
iTrader: (8)
Joined: Sep 2010
Posts: 732
Likes: 0
From: Cincinnati, Ohio
Car: '89 GTA
Engine: 5.7L LS1
Transmission: 4L60E
Axle/Gears: 9 bolt 3.27
Re: 406 High Flow TPI Build
Last edited by White'89; Aug 6, 2011 at 01:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
