Parting out IROC
11-05-2011, 12:19 PM
#1
Junior Member
Thread Starter
Join Date: May 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Parting out IROC
I've decided I will keep the motor together for another project, although I would sell it as a complete motor if anyone is interested.
Newer front Monroe Sensatrac quick struts, they should fit both Camaro and Firebird
Z28 steering gear
Wonder bar
There may be other things I have not listed that you are in need of, please let me know I will check if they are present and in working order, and get back to you. I will ship managable sized items. You are welcome to pick anything up on the weekends, I am in North Warren, Mich. I don't check the forum often, so it's easier to just email me at fast.camaro@hotmail.com or call me 586-709-5025. Make offers.
Newer front Monroe Sensatrac quick struts, they should fit both Camaro and Firebird
Z28 steering gear
Wonder bar
There may be other things I have not listed that you are in need of, please let me know I will check if they are present and in working order, and get back to you. I will ship managable sized items. You are welcome to pick anything up on the weekends, I am in North Warren, Mich. I don't check the forum often, so it's easier to just email me at fast.camaro@hotmail.com or call me 586-709-5025. Make offers.
Last edited by fast88iroc; 12-09-2011 at 06:32 PM.
11-06-2011, 02:38 PM
#3
Member
iTrader: (9)
Join Date: Mar 2002
Location: Erie PA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2008 Silverado, 73 LeMans, 1987 GTA
Engine: 4.8, 350 Pontiac, 350 LT1
Transmission: 4L65E, TH350, T56
Axle/Gears: 3.42, 2.73, 3.42
Re: Parting out IROC
what brand and how much for the front struts? ship to an APO address?
11-06-2011, 03:32 PM
#4
Junior Member
Thread Starter
Join Date: May 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out IROC
Monroe sensatrac iirc ... I will ship them but it probably won't be cheap to do that. They have been on the car for a couple years but its been driven maybe a dozen times since they were put on. It was up on blocks in the garage for the last couple years. If you are interested I will get a shipping quote and a total. Send your email addy to fast.camaro@hotmail.com so I can forward the info. Thanks!
11-06-2011, 08:59 PM
#7
Junior Member
Thread Starter
Join Date: May 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out IROC
$60 + shipping if necessary for the ac delete. If you are interested email me I will send you a pic. I do not want to seperate the inspection plate from the trans.
I do not think the fuel pump is any good. I think the sending unit is still good the fuel level on the gauge flutuated when I added gas. I would sell the pump assy for $50 + shipping. You might even get a working pump out of it.
I do not think the fuel pump is any good. I think the sending unit is still good the fuel level on the gauge flutuated when I added gas. I would sell the pump assy for $50 + shipping. You might even get a working pump out of it.
Trending Topics
11-08-2011, 08:35 PM
#11
Junior Member
Join Date: Apr 2008
Location: Eastpointe- Crappy Michigan
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05 Corvette Z06, 86 T/A Big Block
Engine: 468, 427, I6
Transmission: TH400, 6-speed, TF999
Axle/Gears: 3.42, 5.38
Re: Parting out IROC
pm sent to u L98
By the way, how are the clips that hold it in place? 
11-13-2011, 06:58 PM
#17
Junior Member
Thread Starter
Join Date: May 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out IROC
I will send the info, but I will be honest, I'd rather hold out and see if I can get a buyer for the whole motor first. If no one's interested in the complete motor I will sell the parts seperately.
11-23-2011, 01:49 PM
#25
Member
iTrader: (7)
Join Date: Sep 2003
Location: Coupeville, Washington
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC T-TOP
Engine: 350
Transmission: 700-R4
Re: Parting out IROC
Do you have the power steering brackets for a non AC, long water pump, car on there? Would like to see a picture of that ram air carb cover setup you have too.
11-26-2011, 03:36 AM
#28
Member
iTrader: (1)
Join Date: Jun 2010
Location: Buffalo, NY
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 10 Bolt 3.42 Posi
Re: Parting out IROC
I got dibbs on the brakes I want the calipers, and the whole setup... I sent an email I will call later on.
11-28-2011, 10:03 PM
#29
Junior Member
Thread Starter
Join Date: May 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out IROC
I will keep the wonderbar and struts if no one speaks up for our other third gen.
Steering gear and control arms w/ newer discs and calipers still available.
Steering gear and control arms w/ newer discs and calipers still available.
12-02-2011, 03:32 PM
#31
Senior Member
Join Date: Jun 2011
Location: Detroit, MI
Posts: 939
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z red t-top
Engine: Nothing much
Transmission: I wish t56
Axle/Gears: 9bolt 3.27 4sale
Re: Parting out IROC
im in the Detroit area how much for the spindles and rotors want to do the ls1 brakes swap 50 bucks pick up sojer6mile@gmail.com
12-10-2011, 01:40 PM
#34
Junior Member
Join Date: Apr 2010
Location: Fresno Ca
Posts: 54
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 convertible camaro 1992 z28
Engine: 305 tbi 5.0 tpi
Transmission: 700r4 700r4
Axle/Gears: 2:73 2:73
Re: Parting out IROC
Do u have fog lights if so how much shipped to 93706
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
08-11-2015 03:17 PM