Chip Burning items

Thread Tools
 
Search this Thread
 
Old Mar 2, 2012 | 06:39 AM
  #1  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Chip Burning items

I have a Burn1 chip burner with cable to connect to your computer. I only used it 3 times. I also have the installation CD which can also be downloaded. $50

I have a piggyback adapter that you can use to plug your original PROM and the new chip into. $25

I have 3 Chips that can be used for programming and will check the PN on them tonight when i get home. $5 ea

PM with any questions
Reply
Old Mar 2, 2012 | 09:22 AM
  #2  
mike22115's Avatar
Member
 
Joined: Feb 2011
Posts: 195
Likes: 2
From: St Augustine Florida
Car: 1990 firebird formula
Engine: 355 HSR comp xfi 268 vortec heads
Transmission: 700r4
Axle/Gears: 3.27 BW 9bolt
Re: Chip Burning items

Is this very thing I would need to burn a prom?
Reply
Old Mar 2, 2012 | 09:26 AM
  #3  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

yes sir!
Reply
Old Mar 4, 2012 | 02:11 PM
  #4  
Maxdtran's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 13
Likes: 0
From: Newport Beach, CA
Car: 91 Z28 5.7
Engine: 5.7 L98
Transmission: A/T 700
Axle/Gears: 3.23
Re: Chip Burning items

Hey 93BlackTA. Are you selling these reprogram items? I have a 91 Z28 and trying to disabled the EGR Diagnose. Since I keep getting the infamous Code 32 (EGR). It's a recall but GM won't fix this problem anymore. If you are selling can you give the items specs? And how much do you want for them? If not then can you assist on help out a fellow Camaro brother on where to get the items and software to reprogram the chips to disable the diagnose?
Reply
Old Mar 5, 2012 | 07:23 AM
  #5  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

Originally Posted by Maxdtran
Hey 93BlackTA. Are you selling these reprogram items? I have a 91 Z28 and trying to disabled the EGR Diagnose. Since I keep getting the infamous Code 32 (EGR). It's a recall but GM won't fix this problem anymore. If you are selling can you give the items specs? And how much do you want for them? If not then can you assist on help out a fellow Camaro brother on where to get the items and software to reprogram the chips to disable the diagnose?

PM Sent
Reply
Old Mar 7, 2012 | 05:12 AM
  #6  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

TTT!!!
Reply
Old Mar 7, 2012 | 11:51 AM
  #7  
Maxdtran's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 13
Likes: 0
From: Newport Beach, CA
Car: 91 Z28 5.7
Engine: 5.7 L98
Transmission: A/T 700
Axle/Gears: 3.23
Re: Chip Burning items

I'm not sure if you are selling these burning items. Maybe we have a miscommunication. Are you selling the burning prom adapter, prom, and software? If so how much and am I missing anything else to do this? I have a 91 z28 5.7 auto. Let me know?
Reply
Old Mar 7, 2012 | 11:55 AM
  #8  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

Originally Posted by Maxdtran
I'm not sure if you are selling these burning items. Maybe we have a miscommunication. Are you selling the burning prom adapter, prom, and software? If so how much and am I missing anything else to do this? I have a 91 z28 5.7 auto. Let me know?

Yes items listed are for sale...prices are listed at top in first post of thread. The only thing you would need is a program to change your existing tune (tuner cats etc)

Thanks
Reply
Old Mar 7, 2012 | 12:39 PM
  #9  
Maxdtran's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 13
Likes: 0
From: Newport Beach, CA
Car: 91 Z28 5.7
Engine: 5.7 L98
Transmission: A/T 700
Axle/Gears: 3.23
Re: Chip Burning items

Okay before going any further. I've go the software Tunerpro RT. Now you said you had 3 empty chips. What EDM ID are they. Because 86-89 are the same and they use 1227165. I have a 91 so 90-92 are 1227730. Let me know before we go any further.
Reply
Old Mar 7, 2012 | 12:41 PM
  #10  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

Originally Posted by Maxdtran
Okay before going any further. I've go the software Tunerpro RT. Now you said you had 3 empty chips. What EDM ID are they. Because 86-89 are the same and they use 1227165. I have a 91 so 90-92 are 1227730. Let me know before we go any further.

I will check out the chip ID and let you know....if they arent the same you can buy the rest and get the chips you need somewhere else..i will post chip id shortly
Reply
Old Mar 7, 2012 | 12:44 PM
  #11  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,751
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Chip Burning items

Originally Posted by Maxdtran
Okay before going any further. I've go the software Tunerpro RT. Now you said you had 3 empty chips. What EDM ID are they. Because 86-89 are the same and they use 1227165. I have a 91 so 90-92 are 1227730. Let me know before we go any further.
if you are going to flash burn, you can use a 27sf512, at29c256 depending on you .bin size just adjust offset.

http://support.moates.net/2010/04/05...using-offsets/
Reply
Old Mar 7, 2012 | 12:47 PM
  #12  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

yes im pretty sure the chips i used for flash burning were the 27sf512
Reply
Old Mar 7, 2012 | 01:29 PM
  #13  
utilityguy2's Avatar
Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 486
Likes: 0
Re: Chip Burning items

Make sure you get genuine SST 27sf512 chips from Moates. There are only two places for these discontinued chips as the remaining supply was bought up. I Don't remember off hand the other company.

I recently bought a supply of supposedly genuine SST chips. Wrong! They were counterfeit. They were re-stamped Winbond W27C512 chips which will program OK with Flash and Burn but will not erase. So beware of counterfeits. EBay is full of them and if the are less than $5 they probably are bad.
Reply
Old Mar 7, 2012 | 01:32 PM
  #14  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

The chips i have were bought from moates directly when i bought all the hardware...
Reply
Old Mar 13, 2012 | 11:37 PM
  #15  
salem85's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 4
Likes: 0
From: brighton tn
Car: gunmetal 88 gta 98 yamaha vmax
Engine: l98
Transmission: 700r4
Axle/Gears: bw 9 bolt 327
Re: Chip Burning items

how much for for the whole setup? and would you ship to tenessee?
Reply
Old Mar 14, 2012 | 05:01 AM
  #16  
93BlackTa's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 3
Likes: 0
From: NL, Canada
Car: 93 Trans Am, 89 Iroc Convertible
Engine: 383 LT1, 350 LT1 going in the Iroc
Transmission: T56, 700r4
Axle/Gears: Moser 9" w/3.89, 10 bolt w/3.42
Re: Chip Burning items

Originally Posted by salem85
how much for for the whole setup? and would you ship to tenessee?

PM sent!
Reply
Old Mar 27, 2012 | 05:33 PM
  #17  
Chevy86 IROC-Z's Avatar
Supreme Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (17)
 
Joined: May 2009
Posts: 4,915
Likes: 40
From: Far West
Car: 1986 Camaro Z28 IROC-Z
Engine: 350 Tuned Port Injection, for now.
Transmission: 700R4
Axle/Gears: Posi - 3.23
Re: Chip Burning items

Originally Posted by Maxdtran
Hey 93BlackTA. Are you selling these reprogram items? I have a 91 Z28 and trying to disabled the EGR Diagnose. Since I keep getting the infamous Code 32 (EGR). It's a recall but GM won't fix this problem anymore. If you are selling can you give the items specs? And how much do you want for them? If not then can you assist on help out a fellow Camaro brother on where to get the items and software to reprogram the chips to disable the diagnose?
By law, GM has to fix the issue. The EGR is directly related to smog so they have to comply to be able to maintain the air quality.
Reply
Old Mar 27, 2012 | 07:12 PM
  #18  
utilityguy2's Avatar
Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 486
Likes: 0
Re: Chip Burning items

Originally Posted by Chevy86 IROC-Z
By law, GM has to fix the issue. The EGR is directly related to smog so they have to comply to be able to maintain the air quality.
I think GM charges thousands of people to fix bad EGR valves on their cars every year that are out of warrantee. Even catalytic converters and other emissions parts are only warranted to 100000 miles at least here in the Midwest. But California is a lot harsher so maybe just to clarify for all, what law are you referring too?
Reply
Old Mar 27, 2012 | 07:38 PM
  #19  
Chevy86 IROC-Z's Avatar
Supreme Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (17)
 
Joined: May 2009
Posts: 4,915
Likes: 40
From: Far West
Car: 1986 Camaro Z28 IROC-Z
Engine: 350 Tuned Port Injection, for now.
Transmission: 700R4
Axle/Gears: Posi - 3.23
Re: Chip Burning items

I live in Cali. Over here you must be able to pass emissions which meet C.A.R.B.. We have the toughest and most strict air quality standards. I don't know how the law is in other states but isn't a recall from the dealer a free fix? I currently have a recall on my Camaro about the lighting or something in that area. But when I went to GM, they told me that the recall is not in their system, even after verifying through the, IIRC, National Highway Safty website. I never had a issue with my emissions equipment. So I can't say it's mandatory for GM responsible for the repair. It was just a thought that I put out there. I have the luxury of living in a small town. I have no cat, no A.I.R. equipment, and no smog pump. So I'm running the risk of a extremely hefty fine.
Reply
Old Mar 27, 2012 | 08:41 PM
  #20  
utilityguy2's Avatar
Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 486
Likes: 0
Re: Chip Burning items

Thanks. and as for running the risk... A lot of us do.
Reply
Old Mar 27, 2012 | 09:12 PM
  #21  
Chevy86 IROC-Z's Avatar
Supreme Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (17)
 
Joined: May 2009
Posts: 4,915
Likes: 40
From: Far West
Car: 1986 Camaro Z28 IROC-Z
Engine: 350 Tuned Port Injection, for now.
Transmission: 700R4
Axle/Gears: Posi - 3.23
Re: Chip Burning items

Originally Posted by utilityguy2
Thanks. and as for running the risk... A lot of us do.
I think about 40% - 60% of us members have some kind emissions delete which would be considered illegal. Isn't there a time limit that would make our 3rd gens smog exempt? This year my IROC hit classic status (26 years old).

Last edited by Chevy86 IROC-Z; Mar 27, 2012 at 09:16 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89-IROCZ-5.0TPI
TPI
10
Feb 22, 2022 09:26 PM
F.I. 57 Belair
DFI and ECM
8
Aug 23, 2021 01:09 AM
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
Oct 15, 2015 08:04 AM
okfoz
History / Originality
27
Oct 13, 2015 02:19 PM
meeklay812
Camaros for Sale
1
Oct 1, 2015 03:46 PM




All times are GMT -5. The time now is 09:33 AM.