articwhiteZ
Supreme Member
close
SOLD! I Have a Accel super ram all Accel, from intake to airbox.
it's a bit dusty been sitting for the last 10 years.
the the top part was set up for a NOS fogger. all 8 holes are filled with 1/4 pipe plugs nice and neat. it's not been Cut on.
has the EGR Block off plate installed also accel part.
this came from Lingenfelter back in 1993/94. when i had to car done.
comes with 1 new sets of gaskets, all the bolts, accel Bolts 100% (none stripped by the way)
you get to clean it $705 shipped...(glass beading will make it look like brand new!)
it's only been on 1 eng.in all the years i have had it.
**$750 you get 2 full sets of New accel gaskets SOLD**
$789 you get a set of GM Fuel rails (92 5.7 tpi rails)w/adjsbl reg
and water neck also 92 tpi


look close..accel logo on intake.

for you guys who want a few more HP. for $850 shipped ya get the nos Fogger lift in place
set at 180 hp hit at 8psi of fuel.
and i can deal on this also. not set in stone. but lets be real,
as there are not alot of, all accel super rams for sale today
and remember. shipping runs about $45 for this and is part of the price. so go shopping and let me know whos price, i have to beat, to make a deal..lol
lower 48 only. note, TB is not for sale with intake. you get no TB with this sale...
it's a bit dusty been sitting for the last 10 years.
the the top part was set up for a NOS fogger. all 8 holes are filled with 1/4 pipe plugs nice and neat. it's not been Cut on.
has the EGR Block off plate installed also accel part.
this came from Lingenfelter back in 1993/94. when i had to car done.
comes with 1 new sets of gaskets, all the bolts, accel Bolts 100% (none stripped by the way)
you get to clean it $705 shipped...(glass beading will make it look like brand new!)
it's only been on 1 eng.in all the years i have had it.
**$750 you get 2 full sets of New accel gaskets SOLD**
$789 you get a set of GM Fuel rails (92 5.7 tpi rails)w/adjsbl reg
and water neck also 92 tpi


look close..accel logo on intake.

for you guys who want a few more HP. for $850 shipped ya get the nos Fogger lift in place
set at 180 hp hit at 8psi of fuel.
and i can deal on this also. not set in stone. but lets be real,
as there are not alot of, all accel super rams for sale todayand remember. shipping runs about $45 for this and is part of the price. so go shopping and let me know whos price, i have to beat, to make a deal..lol
lower 48 only. note, TB is not for sale with intake. you get no TB with this sale...
How much for just the nitrous setup?
bump 4 a great deal, man I wish I had more cha ching !
articwhiteZ
Supreme Member
close
Quote:
if sombody wants the ram and not the NOS..Say $200.Originally Posted by budfreak1
How much for just the nitrous setup? No bottle.. you do get a new set of Bottle brackets for 2 bottels
note this fogger set up, has all SS Hard lines,and will buff out to look like chrome.
articwhiteZ
Supreme Member
close
heads up lower price

Member
So $200 for just the intake? Shipping to 46615?
Quote:
Originally Posted by Pontiac_Pete
So $200 for just the intake? Shipping to 46615? 
If he would sell the intake for 200 I would up the bid and do 250.
Junior Member
Any pictures of the nitrous ports themselves? It appears the nos lines run into the upper plenum, not the runners....is that correct?
Thanks,
Matthew
Thanks,
Matthew
articwhiteZ
Supreme Member
close
Quote:
Thanks,
Matthew
yes the Nitrous Ports on the Nozles, spray down into the Runners.Originally Posted by MattVette89
Any pictures of the nitrous ports themselves? It appears the nos lines run into the upper plenum, not the runners....is that correct?Thanks,
Matthew
they are the 90 dgre ports, car ran 11.70 without NOS 383sbc,
10.70/80 W/NOS. fun ride
and thats 2200 feet above sea levLet me know if someone doesn't take it, I have a bottle already sitting here. 

articwhiteZ
Supreme Member
close
Quote:
there are no intake parts with just the NOS kit.Originally Posted by Pontiac_Pete
So $200 for just the intake? Shipping to 46615? it would be only the nos kit. nozles removed from intake,
every thing laid out as it go's together. and taped flat. boxed and shipped.
and thats only if sombody wants only the intake and not the NOS Kit.
look close how it's laid out. it's not just drilled and bolted up.
everything is even in it's layout, fitting nice, fuel presh gauge/NOS gauge
how they Bal with the intake.and sinlds.
and you can still lift off the valve covers, without a fight,
this is not for the shy nos user! its for sombody that wants power
at the push of a button,and wants to win!
the super ram Gives good power all the way up to 5000.
and with the nos running pulls hard to 5800/6000 before nosing off,with
My Cam/heads that i had anyway.
articwhiteZ
Supreme Member
close
have a few guys asking how the planum is tapped..
it's set up to spray down into the runners. and the holes in the top are Verry small. 1/4"NPT
they only go in 1 way. AND will not let a plug go all the way into the planum


also tape was placed over the the face of the Gauges. from Day one.so they would not Get Marked up/scratched

it's set up to spray down into the runners. and the holes in the top are Verry small. 1/4"NPT
they only go in 1 way. AND will not let a plug go all the way into the planum


also tape was placed over the the face of the Gauges. from Day one.so they would not Get Marked up/scratched

Senior Member
Taking any trades
articwhiteZ
Supreme Member
close
Quote:
not at this time.Originally Posted by Sojer
Taking any trades the first ill take it gets it, alot of guys asking for pics, and thats fine,
but remember, nothing is set in stone, and the first ill take it has dibs.
asking for pics, and asking about small parts, is not a lock in on buying,
the Guy who steps up and sendS me, the Ill take it, then pays, is the Buyer,
Just so ya know

pull the trigger. dont just sit there
.. remember..ya snoozzz Ya loozzand saying ill take it.means pulling the trigger and Paying. say within a few hrs.
i do alot of gun sales...and thats how it works. Kewl?... SO.. let Me know.

AND I HAVE DROPPED THE PRICE. over $100 in just the last 24hrs
ON A SIDE NOTE:
no hard feelings if ya looozzz out.. after all it's been up and posted for almost 3or4 full days as of today. and i have talked to a few Guys and sent alot of pics. wish i had more.Super rams, Cuuzz i feel a few guys are going to pull the trigger..all about the same time... ill post the PMs and times/texs of the trigger pullers. and it's not sold untill Im paid..then the add is updated.
articwhiteZ
Supreme Member
close
Quote:
tell ya what... If a Buyer wants only the super ram.Originally Posted by budfreak1
Let me know if someone doesn't take it, I have a bottle already sitting here.
would you want to trade Him Tops. some of the Guys asking are talking about tigging/plugging up the Fogger ports.WOULD BE A SHAME TO...Just me

you should see this thing when you Hit the NOS with the top off just Goofing around..(eng not running)just gooffing...VVAARRRROOOOSSSHHH!!!
wish i still had the Video
Verry kewl

Junior Member
Quote:
the first ill take it gets it, alot of guys asking for pics, and thats fine,
but remember, nothing is set in stone, and the first ill take it has dibs.
asking for pics, and asking about small parts, is not a lock in on buying,
the Guy who steps up and sendS me, the Ill take it, then pays, is the Buyer,
Just so ya know
pull the trigger. dont just sit there
.. remember..ya snoozzz Ya loozz
and saying ill take it.means pulling the trigger and Paying. say within a few hrs.
i do alot of gun sales...and thats how it works. Kewl?... SO.. let Me know.
AND I HAVE DROPPED THE PRICE. over $100 in just the last 24hrs
ON A SIDE NOTE:
no hard feelings if ya looozzz out.. after all it's been up and posted for almost 3or4 full days as of today. and i have talked to a few Guys and sent alot of pics. wish i had more.Super rams, Cuuzz i feel a few guys are going to pull the trigger..all about the same time... ill post the PMs and times/texs of the trigger pullers. and it's not sold untill Im paid..then the add is updated.
Originally Posted by articwhiteZ
not at this time.the first ill take it gets it, alot of guys asking for pics, and thats fine,
but remember, nothing is set in stone, and the first ill take it has dibs.
asking for pics, and asking about small parts, is not a lock in on buying,
the Guy who steps up and sendS me, the Ill take it, then pays, is the Buyer,
Just so ya know

pull the trigger. dont just sit there
.. remember..ya snoozzz Ya loozzand saying ill take it.means pulling the trigger and Paying. say within a few hrs.
i do alot of gun sales...and thats how it works. Kewl?... SO.. let Me know.

AND I HAVE DROPPED THE PRICE. over $100 in just the last 24hrs
ON A SIDE NOTE:
no hard feelings if ya looozzz out.. after all it's been up and posted for almost 3or4 full days as of today. and i have talked to a few Guys and sent alot of pics. wish i had more.Super rams, Cuuzz i feel a few guys are going to pull the trigger..all about the same time... ill post the PMs and times/texs of the trigger pullers. and it's not sold untill Im paid..then the add is updated.
I texted your phone yesterday and PMd you I would buy it but got no response. Then you posted this hours later. So I dunno?
articwhiteZ
Supreme Member
close
Quote:
PM sent.Originally Posted by MattVette89
I texted your phone yesterday and PMd you I would buy it but got no response. Then you posted this hours later. So I dunno? getting tex's,from diff Guys, and PM's, from 2 diff sites, is why i posted.
i dont want to be rude to anyone.just sorta let every one know. there not the only guy, whos talking to me.

articwhiteZ
Supreme Member
close
Sold!
funds received 1:45 PM today.
funds received 1:45 PM today.
articwhiteZ
Supreme Member
close
NOS Fogger still up for sale. this is just the NOS Kit, you get a bottle bracket.but no bottle. with 1 set of sets 180 hp hit. or 200/ or 250/ or 300.
the silnds and fogger nozles. sell for more then this
the silnds and fogger nozles. sell for more then this





