[NJ] SBC Stroker Block
Thread Starter
Member
iTrader: (9)
Joined: Feb 2004
Posts: 176
Likes: 0
From: NJ
Car: 1986 Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.10
SBC Stroker Block
I have my old stroker block for sale. The block is 4 bolt main 1 rms. I was bored .30 over and notched to my Scat Rotating assembly. Block was filled partly,mains where align bored,block was hot tank,new freeze plugs,cam bearings installed when machined. Over 900 in machining not include price of block. The only damage to the block if you want to call it damage is the cylinders need a quick hone, and a new #2 main.
Now the story about the main. When assembling the motor the one main got flipped around and when tighten the main down it hung over the lip of the block and got a small hair line crack. I took it to my machine shop and they said I was fine to run it like that. I dont want to sell the block with that main so it will need a new one.
Block has 5 passes on it and about 10 mins running time.
Block is sitting on the stand.
Asking 300 obo
Now the story about the main. When assembling the motor the one main got flipped around and when tighten the main down it hung over the lip of the block and got a small hair line crack. I took it to my machine shop and they said I was fine to run it like that. I dont want to sell the block with that main so it will need a new one.
Block has 5 passes on it and about 10 mins running time.
Block is sitting on the stand.
Asking 300 obo
Thread Starter
Member
iTrader: (9)
Joined: Feb 2004
Posts: 176
Likes: 0
From: NJ
Car: 1986 Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.10
Re: SBC Stroker Block
Here some pictures sorry they are so big:
w~~60_57.JPG)
Last edited by Whoboy580; Jul 12, 2012 at 05:45 PM.
Trending Topics
Junior Member
iTrader: (1)
Joined: Jul 2008
Posts: 38
Likes: 0
From: Perkasie, PA
Car: 1987 Trans AM
Engine: 355 4-bolt, L98 heads, Holley 650DP
Transmission: 700R4
Axle/Gears: 3.70 9-bolt
Re: SBC Stroker Block
Very interested, where in nj? I live about 25 miles north of philly.
Junior Member
iTrader: (4)
Joined: Oct 2006
Posts: 64
Likes: 4
From: Indiana
Car: 1991 Camaro Rs/Z28 clone
Engine: 5.3LSX
Transmission: T-56
Axle/Gears: DTS 12 Bolt 4.10
Re: SBC Stroker Block
I wish I didn't live so far, I've been looking a 1pc 350 to build a stroker with
Thread Starter
Member
iTrader: (9)
Joined: Feb 2004
Posts: 176
Likes: 0
From: NJ
Car: 1986 Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.10
Re: SBC Stroker Block
If you want I can get you a shipping quote from DHL,Fedex,and UPS just send me your zip.
Junior Member
iTrader: (4)
Joined: Oct 2006
Posts: 64
Likes: 4
From: Indiana
Car: 1991 Camaro Rs/Z28 clone
Engine: 5.3LSX
Transmission: T-56
Axle/Gears: DTS 12 Bolt 4.10
Re: SBC Stroker Block
my zip is 46992, if it goes freight, I do believe I have a place with a shipping dock it could be dropped off there. Thanks
Thread Starter
Member
iTrader: (9)
Joined: Feb 2004
Posts: 176
Likes: 0
From: NJ
Car: 1986 Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.10
Re: SBC Stroker Block
it will be UPS freight, dropped off at the shipping dock is 275.00, if you need it dropped off at your house 360.00. It will take two days to get to you. let me know. Also fed ex want 600
Junior Member
iTrader: (4)
Joined: Oct 2006
Posts: 64
Likes: 4
From: Indiana
Car: 1991 Camaro Rs/Z28 clone
Engine: 5.3LSX
Transmission: T-56
Axle/Gears: DTS 12 Bolt 4.10
Re: SBC Stroker Block
Hmmm, I'll keep it in mind, but I am going to continue searching local as well just to see if anything pops up close. 550 isn't a bad price, just eating a little more into my budget then I was hoping for.
Re: SBC Stroker Block
I have my old stroker block for sale. The block is 4 bolt main 1 rms. I was bored .30 over and notched to my Scat Rotating assembly. Block was filled partly,mains where align bored,block was hot tank,new freeze plugs,cam bearings installed when machined. Over 900 in machining not include price of block. The only damage to the block if you want to call it damage is the cylinders need a quick hone, and a new #2 main.
Now the story about the main. When assembling the motor the one main got flipped around and when tighten the main down it hung over the lip of the block and got a small hair line crack. I took it to my machine shop and they said I was fine to run it like that. I dont want to sell the block with that main so it will need a new one.
Block has 5 passes on it and about 10 mins running time.
Block is sitting on the stand.
Asking 300 obo
Now the story about the main. When assembling the motor the one main got flipped around and when tighten the main down it hung over the lip of the block and got a small hair line crack. I took it to my machine shop and they said I was fine to run it like that. I dont want to sell the block with that main so it will need a new one.
Block has 5 passes on it and about 10 mins running time.
Block is sitting on the stand.
Asking 300 obo
Thanks
Thread Starter
Member
iTrader: (9)
Joined: Feb 2004
Posts: 176
Likes: 0
From: NJ
Car: 1986 Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.10
Re: SBC Stroker Block
LAST CHANCE..
IF IT DON'T SELL BY NEXT FRIDAY IT'S GOING TO SCRAP YARD OR DONATING IT TO A LOCAL SCHOOL
IF IT DON'T SELL BY NEXT FRIDAY IT'S GOING TO SCRAP YARD OR DONATING IT TO A LOCAL SCHOOL
Thread Starter
Member
iTrader: (9)
Joined: Feb 2004
Posts: 176
Likes: 0
From: NJ
Car: 1986 Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.10
Re: SBC Stroker Block
That's why I am selling it cheap. I am trying to bring my new motor home but this block is in my way
Thread
Thread Starter
Forum
Replies
Last Post
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
Nov 10, 2015 04:07 PM
[GA] Shorty headers
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 16, 2015 02:20 AM