WTB carb style EFI manifold
Thread Starter
Member
iTrader: (2)
Joined: Jul 2010
Posts: 123
Likes: 0
From: Walton, NY
Car: 80 Camaro Z28
Engine: ~400hp Vortec 355ci
Transmission: T56 6-speed
Axle/Gears: 4.10 Moser 8.5" 10-bolt
WTB carb style EFI manifold
Converting my carb car to EFI. Looking for a carb-style manifold for old SBC heads, preferably with rails, injectors and throttle body.
Junior Member
Joined: Aug 2009
Posts: 84
Likes: 0
From: hesperia california 92345
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: WTB carb style EFI manifold
i have a 4150 efi throttle body that im selling
Thread Starter
Member
iTrader: (2)
Joined: Jul 2010
Posts: 123
Likes: 0
From: Walton, NY
Car: 80 Camaro Z28
Engine: ~400hp Vortec 355ci
Transmission: T56 6-speed
Axle/Gears: 4.10 Moser 8.5" 10-bolt
Junior Member
Joined: Aug 2009
Posts: 84
Likes: 0
From: hesperia california 92345
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: WTB carb style EFI manifold
here are the pics .intake sold already. but i think the best i can do is 150 plus shipping.
Last edited by daniel92345z28; Sep 6, 2012 at 12:08 PM.
Junior Member
Joined: Aug 2009
Posts: 84
Likes: 0
From: hesperia california 92345
Car: 82 camaro z28
Engine: gen 6 454 carburated and cammed
Transmission: ls1 t56 trans
Axle/Gears: currie f9 with 3.70 gears
Re: WTB carb style EFI manifold
this throttle doesnt have one but you can do this to http://www.f-bodysport.com/iac.htm
Trending Topics
Thread Starter
Member
iTrader: (2)
Joined: Jul 2010
Posts: 123
Likes: 0
From: Walton, NY
Car: 80 Camaro Z28
Engine: ~400hp Vortec 355ci
Transmission: T56 6-speed
Axle/Gears: 4.10 Moser 8.5" 10-bolt
Re: WTB carb style EFI manifold
Yeah, I've got a few on the table right now...looking to sort out the best setup before I pull the trigger. As long as I can fit it under the hood, it sounds like the Hurricane with longer runners might be better for me than a Victor E. I will let you know soon one way or the other.
Banned
iTrader: (4)
Joined: Dec 2000
Posts: 861
Likes: 0
From: ILL
Car: 1986 Pontiac TA
Engine: 383
Transmission: 700R4
Axle/Gears: 3.70
Re: WTB carb style EFI manifold
Under my stock TA hood i ran the Edelbrock intake, 1" spacer, 1/2" air cleaner spacer and the Spectre air cleaner with the 3" x 14" filter.
Thread Starter
Member
iTrader: (2)
Joined: Jul 2010
Posts: 123
Likes: 0
From: Walton, NY
Car: 80 Camaro Z28
Engine: ~400hp Vortec 355ci
Transmission: T56 6-speed
Axle/Gears: 4.10 Moser 8.5" 10-bolt
Re: WTB carb style EFI manifold
Yeah, the Victor would be better for hood clearance than the Hurricane...and mine is already tight even with the 3.5" cowl since I wedged the subframe. Would leave me some room for a nitrous plate too. haha
Junior Member
Joined: Feb 2004
Posts: 37
Likes: 0
From: NC
Car: 1969 camaro
Engine: 90 TPI
Transmission: 400turbo
Re: WTB carb style EFI manifold
I have a super victor converted by wilson for sale. I also have a 9901-101-1 Holley intake I will sale. The edelbrock is listed in here.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
beachrodder
Tech / General Engine
7
Aug 25, 2015 08:05 AM
TA8487
Engine/Drivetrain/Suspension Wanted
1
Aug 16, 2015 12:21 PM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM
