1992 B4C 1LE ... roller ... no motor ... no trans ...
1992 B4C 1LE ... roller ... no motor ... no trans ...
the car is going racing ...... let the VIN registration people know .......
gas tank comes out this weekend ...
gas tank comes out this weekend ...
Last edited by TVP122; Oct 2, 2012 at 08:17 PM.
Member
iTrader: (4)
Joined: Mar 2010
Posts: 165
Likes: 0
From: Central CA
Car: 1992 Camaro
Engine: LB9
Transmission: WC T5
Axle/Gears: 10 Bolt - 3.42
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Darn, down goes another one. Tell the guy who has the B4C VIN list going to update his list. Minor correction(if not mistaken), there were 587 of these and 200(ish) of those were strictly 1LE's with A/C and radio delete which is probably the only thing more rare than the B4C/1LE in '92.
Nonetheless, the hope is that it finds a special someone that'll put some life back in it.
Good luck on the sell.....and if no dice......well, i could use some of those parts, lol.
Nonetheless, the hope is that it finds a special someone that'll put some life back in it.
Good luck on the sell.....and if no dice......well, i could use some of those parts, lol.
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
trade for a streetfighter?? Ill bring it back to its rare prime.
Supreme Member

Joined: May 2005
Posts: 1,058
Likes: 4
From: Malvern, Arkansas
Car: 90 IROC 2-92 Zs blk vert & prpl
Engine: stealth ram brodix track 1 ful port
Transmission: 700r4 4l80e
Axle/Gears: iroc 375 lokr 92 Z 277 pos vert 327
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Interesting approach to this car. If he parts it the hard way one part at a time he gets 2grand if he sells all the parts. If he sells it complete he gets 2 grand. Hope the car is saved since it is an important one.
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
it's truely as shame either way ... the moronPO took the motor/trans for a elk that could use ANY motor since it's a rusted out POS ! and likely won't see the motor installed in this decade anyway !!!
I have a 305TPI and a 1997 suburban ... so .. it may become a vortec TPI 350 auto .. still trying to figure out if the 4l6E in the sub will plug and play .. and I REALLY hate to ruin the sub to fix this !! but it'll be WAY more fun !!
do the math ... it's WAY MORE than 2k in parts ...
STOP PM-ing for parts ... you'll just make sure you don't get a shot at them IF the time comes ...
trade a street fighter ? surely you don't mean that worthless video game ?
I have a 305TPI and a 1997 suburban ... so .. it may become a vortec TPI 350 auto .. still trying to figure out if the 4l6E in the sub will plug and play .. and I REALLY hate to ruin the sub to fix this !! but it'll be WAY more fun !!
do the math ... it's WAY MORE than 2k in parts ...
STOP PM-ing for parts ... you'll just make sure you don't get a shot at them IF the time comes ...
trade a street fighter ? surely you don't mean that worthless video game ?
Joined: May 2005
Posts: 728
Likes: 1
From: Toronto, Ohio
Car: 1991 Trans Am GTA
Engine: 355
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Unless you swap in the wiring harness and PCM, no. The sub has a electronic controlled 4L60E, the Camaro just had the 4L60 with no electronics. They do make aftermarket tranny controllers now, Summit Racing has them.
Trending Topics
Junior Member
Joined: Aug 2005
Posts: 16
Likes: 0
From: Green Bay WI
Car: 1985 irocz
Engine: 305 the l69 was removed years ago.
Transmission: t-5
Axle/Gears: 3.73 peg leg
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I have a 1991 l98 tpi speed density, with harness and a few transmissions, you should just put it back together there are always people willing to spend good money on those cars.
Joined: Sep 2004
Posts: 347
Likes: 88
From: Pearland, Texas
Car: 1985 Firebird & 1992 Camaro B4C 1LE
Engine: 310 LS1. & 305
Transmission: TH350 & T5
Axle/Gears: 9" 3.73
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
So you're in Georgia? How's the interior look, after being open to the elements?
Yeah, these things are a lot of fun to toss around. They're a bit lighter than your normal Z/RS, and handle wonderfully.
Yeah, these things are a lot of fun to toss around. They're a bit lighter than your normal Z/RS, and handle wonderfully.
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I had a TCI compu hooked to a 48le .. was hoping I didn't have to go that route ...
your in WI parts ... I'm in GA with no money ..... how's that work ???
interior is MOLDY to say the least .... 181k miles .. it's worn out too ...
your in WI parts ... I'm in GA with no money ..... how's that work ???
interior is MOLDY to say the least .... 181k miles .. it's worn out too ...
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I meant a street fighter as in a motorcycle heres a pic. Just had a TON more work done to it.
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I can barely keep things with 4 wheels from flipping ... so .. no ... I better not get back on a 2 wheeler ... again ... after 28 years
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Good luck with the sale though regardless, I hope someone buys it and restores it instead of parting it out. Looks like a solid car for the most part.
Junior Member
Joined: Aug 2012
Posts: 44
Likes: 0
From: Columbus, Ohio
Car: 91 Camaro Z-28 Convertible
Engine: 5.0
Transmission: Auto
Axle/Gears: 2.73
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I asked you to call me, and you asked why?
I was in the state and was going to pick up the car...
I was in the state and was going to pick up the car...
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I asked you to call me, and you asked why?
I was in the state and was going to pick up the car...
.................got no answer and didn't hear back ........................
How big of a crack does the chin spoiler have?
....................................why are you going to buy the car ?...............................
I was in the state and was going to pick up the car...
.................got no answer and didn't hear back ........................
How big of a crack does the chin spoiler have?
....................................why are you going to buy the car ?...............................
Member
Joined: Dec 2010
Posts: 101
Likes: 0
From: Milledgeville, GA
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
If you're selling me the chin spoiler at the listed $100 and the rest comes free.
Member
Joined: Dec 2010
Posts: 101
Likes: 0
From: Milledgeville, GA
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I'm just saying, you've got it listed by parts and prices. If you're wanting to sell it as a roller, you've got it in the wrong section.
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
You suck at selling lol
Member
Joined: Dec 2010
Posts: 101
Likes: 0
From: Milledgeville, GA
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Who was the no money comment towards? I was offering a swap if you were wanting to sell it as a roller.
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
hilarious ....
another post .. still no interest and no money .....
and bill finally replies ... I called got no answer nor reply so posted "why" ? ... and my com sucks ????
REALLY ?????? your the ones posting to a dead thread .....
the car in question is already pulled from sale and it's going racing ... so stop your whining .... I bought the car to hack it up ... figured one of you might want to be a hero and save it ... but instead ... what do I have ???? the car I bought to hack up ... and replies from fruit cakes .... as expected and treated as such .... must be my young and inexperience .... but who has the b4c 1le ??? oh yeah .. the 45 year old that's been hacking third gens since they were new .... that's been on thirdgen.org since it was missouri.edu ....
your welcome .....
another post .. still no interest and no money .....
and bill finally replies ... I called got no answer nor reply so posted "why" ? ... and my com sucks ????
REALLY ?????? your the ones posting to a dead thread .....
the car in question is already pulled from sale and it's going racing ... so stop your whining .... I bought the car to hack it up ... figured one of you might want to be a hero and save it ... but instead ... what do I have ???? the car I bought to hack up ... and replies from fruit cakes .... as expected and treated as such .... must be my young and inexperience .... but who has the b4c 1le ??? oh yeah .. the 45 year old that's been hacking third gens since they were new .... that's been on thirdgen.org since it was missouri.edu ....
your welcome .....
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Some grammar would do you some good.
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
Admit it, that car inst going racing. It is going to sit in that junkyard its at now and rot away. I see it happen all the time
Senior Member
iTrader: (2)
Joined: May 2002
Posts: 504
Likes: 0
From: Hollywood, FL
Car: '88 Black GTA, T-tops, digital dash
Engine: 5.7 TPI w/custom chip
Transmission: 700R4
Axle/Gears: 9 bolt 327 posi
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
I really don't understand how some newby thinks he can come in here and insult our long time TGO members like that when it's soooo obvious he can't express his thoughts properly. I guess that's the internet for you....
Member
Joined: Dec 2010
Posts: 101
Likes: 0
From: Milledgeville, GA
Car: 1992 Camaro Z28
Engine: L98
Transmission: 86' 700R4
Axle/Gears: 10 Bolt, 3.42's
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...
If you look, the first post was edited after we started inquiring about the parts. He originally did have the list of parts and prices up....I guess he only wants to gloat that he has the body...which really doesn't impress me anyway.
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: 1992 B4C 1LE ... roller ... no motor ... no trans ...

Sounds like he's got his work cut out for him. Poor car...
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM







