Hey Everyone, Below is a list of some stuff that i have laying around that i will not need. Trying to make a few extra bucks to finish off my new engine. If interested I can send some pix. We'll talk about shipping as well. Thanks!!

Crane Aluminum Rockers 3/8 stud, 1.5 ratio: Great shape $75
Crane Fireball Pushrods: New $40
Comp Cams Magnum Pushrods: Like New $75
Edelbrock Performer RPM Intake: Nice shape, could use a cleaning $100
Eagle SIR Rods 5.7: Like New $100
Flexplate, External balance for 383: New $30
Balancer for same: Not new but nice: $20
World Products Heads 2.02 and I think 1.550 springs and mild port work, went mid 12s on 383: Nice shape $400
Valve Covers, Chrome with Chevrolet and Logo both short and tall: Nice shape $10 a pair

 

Part number on heads? Pics? CC size (64 or 76?) intake runner cc? Very interested!

 

can u send pics of the covers? perimeter or center bolt?

 

They're 67cc chambers and not too sure of the intake. They would need a decent cleaning as I spun the bottom end and wouldn't want you to get shaving in you engine. Also, I never noticed that one of the push rod guides has a broken tang, see pic. Other than that they produce mounds of torque and I was never disappointed.

 

Only have the short ones. The tall look like *** and I wouldn't do that to anyone.

 

Thanks, Looking For Centerbolt Though

 

S/R torquer heads have 170CC intake ports, but he says they are ported so depending on the extent, they might flow more.

 

I really don't remember if and what was done. I do know that they worked great on my old 383. That thing was a beast..

 

No worries, just trying to get things out there...

 

What? Tall looks great, and are a must with most roller rockers.

 

No no, i love the tall ones. The one's that i have just aren't in the best condition and wouldn't want to send anyone junk.

 

details on the rods. part #, time used and so on.

 

I'll try to get you pics as soon as i get home tonight, been super busy. I'll attach a link for you to check them out though. I bet I only have about 1000 miles on them with 6-7 passes. The pistons are still pressed on and would have to be taken off.

http://baldwinraceparts.com/pistons-...y-pressed.html

 

Rocker info please

 

They are Crane Energizer rockers for a 3/8 stud with a 1.5 ratio. They have about 2000 miles on them with zero passes at the track.

 

what kind of pistons?

 

Nothing really great. They are Keith Black hypereutectic with about 10.5-1 when used with a 64cc head. They are to be used with a 5.7" rod and a 3.750 stroke crank for a total of 383cid. They really aren't bad when used as a lower budget street car. I can send pix if you'd like...

 

Rockers are sold!!

 

Bumpity bump! Everything must go! Rockers are sold, everything else still up for grabs. Make an offer and lets talk...

 

Do you still have the flex plate?

 

man I wanted those rockers! damn work for letting me off late!

 

I still have it!

 

do you still have the intake? if so can you please post model number or pics?

 

Its an Edelbrock Performer RPM, non EGR with about 2000 miles on it. Just needs a good cleaning. No stripped holes or anything..Im having issues uploading pics, pm me a cell number and ill send you some.

 

I'm interested in the rods and pistons if I can get some pictures.

 

I'm not home right now but will as soon as I get home later...

 

Do you still have the heads?

 

As a matter of fact I do..

 

Sorry, i haden't realized that they were spoken for...

 

Still interested?? PM me a cell and i have pics for you!

mike

 

if it falls through let me know

 

They're going out the door today but thanks for the reply and interest.

Mike

 

Everything is gone except that Performer RPM Intake! All bolt holes are good, none stripped or anything. Someone jump on it and get it out of my way!!

Still having issues uploading pics. PM me a cell if interested and i'll send you a couple....

 

Still have that intake? Is it spread bore or square?