[OH] Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Thread Starter
Junior Member
iTrader: (3)
Joined: Jan 2011
Posts: 22
Likes: 0
From: OH
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Had this up in the classifieds for a while with no luck as a complete "project" car so I'll see what I can get if i part it out.
Engine *can hear run for time being!*
4.8
ARP rod bolts
LS9 cam (different front cover)
LS6 valve springs
Truck intake
f-body oil pan
ported ls6 oil pump
Royal Purple oil
Complete engine $1100 picked up
Transmission
Built 4l60e
two transmission coolers
3500 stall converter
$1200 OBO picked up
Or $300 for stall converter and $1000 for trans with stock converter
OR $2200 OBO for engine and transmission
2002 SS Camaro rear end with 3.73 gears posi disc
$320 OBO picked up
"LS1 Big Brake Upgrade" in the front
All new shocks (KYB) and springs.
WS6 sway bars
all new poly bushings
$500 for everything- pending on just brake setup and shocks
Turbo Components
Master Power T76 turbo
Tial 44mm WG
HKS SSQV BOV
4 inch intercooler
2.5 inch cold/hot side piping
3 inch down pipe and 3 inch exhaust
ALL for $1900 OBO
Apexi AVCR Boost controller-- sold
Interior
Fourth gen dashboard, dash pad (cut for third gen) and center console
$275 OBO
fourth gen leather seats
$400 for front and back
Old style pillar pod that replaces stock one
$70 shipped
Exterior
4 inch steel cowl hood with some dents on the corners
$200 OBO
If I can sell the car as a roller I would prefer that, because I have por-15'ed it and fat matted the whole interior. I will sell the roller with all new suspension components, ws6 sway bars, ls1 big brake upgrade, 2000 Camaro ss rear end with 3.73 gears posi disc, and full interior for $2100 OBO
OR, the whole car for $5500 as it sits now, running and needing a tune.
Car now has stock red cloth seats as I have removed the grey leather ones for sale
**Everything is sold AS IS. I am not responsible for any damage caused to your car or yourself after purchase**
Engine *can hear run for time being!*
4.8
ARP rod bolts
LS9 cam (different front cover)
LS6 valve springs
Truck intake
f-body oil pan
ported ls6 oil pump
Royal Purple oil
Complete engine $1100 picked up
Transmission
Built 4l60e
two transmission coolers
3500 stall converter
$1200 OBO picked up
Or $300 for stall converter and $1000 for trans with stock converter
OR $2200 OBO for engine and transmission
2002 SS Camaro rear end with 3.73 gears posi disc
$320 OBO picked up
"LS1 Big Brake Upgrade" in the front
All new shocks (KYB) and springs.
WS6 sway bars
all new poly bushings
$500 for everything- pending on just brake setup and shocks
Turbo Components
Master Power T76 turbo
Tial 44mm WG
HKS SSQV BOV
4 inch intercooler
2.5 inch cold/hot side piping
3 inch down pipe and 3 inch exhaust
ALL for $1900 OBO
Apexi AVCR Boost controller-- sold
Interior
Fourth gen dashboard, dash pad (cut for third gen) and center console
$275 OBO
fourth gen leather seats
$400 for front and back
Old style pillar pod that replaces stock one
$70 shipped
Exterior
4 inch steel cowl hood with some dents on the corners
$200 OBO
If I can sell the car as a roller I would prefer that, because I have por-15'ed it and fat matted the whole interior. I will sell the roller with all new suspension components, ws6 sway bars, ls1 big brake upgrade, 2000 Camaro ss rear end with 3.73 gears posi disc, and full interior for $2100 OBO
OR, the whole car for $5500 as it sits now, running and needing a tune.
Car now has stock red cloth seats as I have removed the grey leather ones for sale
**Everything is sold AS IS. I am not responsible for any damage caused to your car or yourself after purchase**
Last edited by 4.8camaro; May 2, 2013 at 07:30 PM. Reason: more pics added
Senior Member
iTrader: (9)
Joined: Jun 2002
Posts: 742
Likes: 0
From: La Mirada, California
Car: 1991 Camaro RS
Engine: L98 350 TPI
Transmission: 700R4
Axle/Gears: ZT LSD with 3.42 - LS1 brakes
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
I might be interested in the LS1 front brake setup if you are willing to seperate from the bundle... and cost of shipping to 90638... 
Member
iTrader: (2)
Joined: Jan 2006
Posts: 103
Likes: 1
From: Ettrick WI
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
wish you were closer on the motor and tranny
Last edited by stealthram92z; Apr 30, 2013 at 07:37 AM.
Thread Starter
Junior Member
iTrader: (3)
Joined: Jan 2011
Posts: 22
Likes: 0
From: OH
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
Cmmcginnis I can. Make an offer
Trending Topics
Thread Starter
Junior Member
iTrader: (3)
Joined: Jan 2011
Posts: 22
Likes: 0
From: OH
Car: '89 Camaro
Engine: 4.8, ls9 cam, mpt76
Transmission: Built 4l60e, 3600 stall TC
Re: Part out: Turbo 4.8 89 Camaro with almost all fourth gen parts
more pics added.. injectors pending, brake setup pending. still have front ws6 sway bar
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
The_Phoenix
Engine/Drivetrain/Suspension Parts for Sale
7
Sep 3, 2015 10:56 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM
