[IN] Stern Hyper Mesh II 18" wheels
Thread Starter
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Stern Hyper Mesh II 18" wheels
I bought these wheels new 3 years ago, paid $700 shipped.
Found out the fronts would not clear the hub, took them to a Large CNC Machine Shop in Louisville, KY that does industrial stuff, gave them a stock brake rotor to use for measurement. They then bored the front hub holes to clear. Very well done. Cost me $100.
I then ordered a set of Aluminum Hub Centric rings. $25
Then on a whim, I ordered some Vintage Racing Gold wheel paint from Eastwood, and got carried away and did a quick spray paint job on them.
IMO, they should be striped to bare and repainted or polished.
Last week I bought different wheels and will not be using these.
The fronts are 18"x8.5"
The rears are 18"x9.5"
I would have to look for offset specs, I have posted them here before if anyone wants to search.
They fit all around with no need for spacers.
Lug nuts as well as socket are included. Unfortuantly I am 2 lug nuts short, when I bought them they sent me 2 that were wrong, I did not notice that till sometime later.
Because of the paint issue, I am only asking $300 for the set, plus shipping. I feel the price is bottom dollar, no reason to ask more so I can negotiate, I think it is a very fair price. My lose your gain!
Would take some 88 style iroc wheels on partial trade.
These wheels have never had a tire mounted on them, and have been boxed up most of the time I have had them.
I am located in Southern Indiana, near Louisville, KY. Willing to drive a reasonable distance to meet, shipping would be very costly.
Rear wheel,
Found out the fronts would not clear the hub, took them to a Large CNC Machine Shop in Louisville, KY that does industrial stuff, gave them a stock brake rotor to use for measurement. They then bored the front hub holes to clear. Very well done. Cost me $100.
I then ordered a set of Aluminum Hub Centric rings. $25
Then on a whim, I ordered some Vintage Racing Gold wheel paint from Eastwood, and got carried away and did a quick spray paint job on them.
IMO, they should be striped to bare and repainted or polished.
Last week I bought different wheels and will not be using these.
The fronts are 18"x8.5"
The rears are 18"x9.5"
I would have to look for offset specs, I have posted them here before if anyone wants to search.
They fit all around with no need for spacers.
Lug nuts as well as socket are included. Unfortuantly I am 2 lug nuts short, when I bought them they sent me 2 that were wrong, I did not notice that till sometime later.
Because of the paint issue, I am only asking $300 for the set, plus shipping. I feel the price is bottom dollar, no reason to ask more so I can negotiate, I think it is a very fair price. My lose your gain!
Would take some 88 style iroc wheels on partial trade.
These wheels have never had a tire mounted on them, and have been boxed up most of the time I have had them.
I am located in Southern Indiana, near Louisville, KY. Willing to drive a reasonable distance to meet, shipping would be very costly.
Rear wheel,
Thread Starter
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Stern Hyper Mesh II 18" wheels
Front wheel, it is not bent or damaged at the top of the lip in the pic, thats just ssome funky light play going on.
Thread Starter
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Stern Hyper Mesh II 18" wheels
Fronts are 18x8.5 with 13mm offset
rear. Are 18x9.5 with 15mm offset.
rear. Are 18x9.5 with 15mm offset.
Thread Starter
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Stern Hyper Mesh II 18" wheels
For those interested, I just got a UPS quote to ship to Texas, $135.00
Thread Starter
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Trending Topics
Thread Starter
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Stern Hyper Mesh II 18" wheels
pm me a shipped bottom dollar price to 71105
Thread
Thread Starter
Forum
Replies
Last Post
drptop70ss
Engine/Drivetrain/Suspension Wanted
3
Oct 4, 2015 09:44 PM
punkmaster98
Interior Parts for Sale
0
Sep 8, 2015 09:45 PM
