Vortec Heads
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z
Vortec Heads
Hey, made some changes to my build plan. So I got some Vortec heads to sell. There used. Came off an L31 in a GMC. I haven't done anything to them except clean them. I'd like to get $200 or best. Maybe trade for some L98 Heads?
I have a 1970's Q-Jet. 750cfm would like $50 or best.
Holley 600cfm vacuum sec. Needs rebuilt. $50 or best
Also have the rotating assembly from the L31. Offers?
I do have the L31 block, but I broke bolts off in it. Machine shop said $100 to fix. I'd take $10 for the block local pick up only on the block.
I'm lookin for L98 heads in useable condition. A tpi intake base. Good set of 22# injectors.or just make $ offers.
I have a 1970's Q-Jet. 750cfm would like $50 or best.
Holley 600cfm vacuum sec. Needs rebuilt. $50 or best
Also have the rotating assembly from the L31. Offers?
I do have the L31 block, but I broke bolts off in it. Machine shop said $100 to fix. I'd take $10 for the block local pick up only on the block.
I'm lookin for L98 heads in useable condition. A tpi intake base. Good set of 22# injectors.or just make $ offers.
#5
Member
Join Date: Oct 2011
Location: South Bend,IN
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Car: '97 TA WS6 vert & '88 Formula 350
Engine: LT1 & 383 HSR
Transmission: T-56 & T-56
Axle/Gears: 3.42 & 3.27
Re: Vortec Heads
are the heads 062 or 902? Where in central Michigan? I am from South Bend,IN.
Trending Topics
#11
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z
Re: Vortec Heads
Heads are sold. Other items still for sale though. Really don't wanna scrap any of it... Willing to sell crank and rods, carbs very cheap.
#12
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z
Re: Vortec Heads
Update: crank, rods, dish pistons $100 shipped.
Roller Cam and lifters. Used. $75 shipped
These parts are from a L31 1997 GMC 4X4. rollers move freely and have been stored in lithium grease. Stock push rods also. Crank and rods have been kept in block and coated in 10w30 to prevent rust and prevent warping.
600cfm Holley vaccuum secondary 4bbl needs rebuilt,
750cfm Q-Jet from late 70's
$40 each shipped $70 for both
Roller Cam and lifters. Used. $75 shipped
These parts are from a L31 1997 GMC 4X4. rollers move freely and have been stored in lithium grease. Stock push rods also. Crank and rods have been kept in block and coated in 10w30 to prevent rust and prevent warping.
600cfm Holley vaccuum secondary 4bbl needs rebuilt,
750cfm Q-Jet from late 70's
$40 each shipped $70 for both
#14
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z
Re: Vortec Heads
BUMPITY BUMP BUMP BUMP.....bump
Update: crank, rods, dish pistons $100 shipped.
Roller Cam and lifters. Used. $75 shipped
These parts are from a L31 1997 GMC 4X4. rollers move freely and have been stored in lithium grease. Stock push rods also. Crank and rods have been kept in block and coated in 10w30 to prevent rust and prevent warping.
600cfm Holley vaccuum secondary 4bbl needs rebuilt,
750cfm Q-Jet from late 70's
$40 each shipped $70 for both
Roller Cam and lifters. Used. $75 shipped
These parts are from a L31 1997 GMC 4X4. rollers move freely and have been stored in lithium grease. Stock push rods also. Crank and rods have been kept in block and coated in 10w30 to prevent rust and prevent warping.
600cfm Holley vaccuum secondary 4bbl needs rebuilt,
750cfm Q-Jet from late 70's
$40 each shipped $70 for both
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
08-11-2015 06:55 PM