Most of the parts below were used in my 1990 427 LS3 camaro for around 3500 miles. All prices are OBO + shipping. Parts are located in Davenport, IA. Pictures are available for serious buyers


· lS3 / LS2 water pump, thermostat and thermostat housing $100
· QM600 cam $100
· Yella Terra 1.8 ratio LS3 shaft rocker arms $400
· CV 7.450 3/8" pushrods $100
· Autometer electric oil temp gauge sport comp pn 3347$40
· Autometer electric fuel pressure gauge sport comp pn 3363 $100
· Whipple 8 rib 3.00 pulley $100
· Whipple/Reichard 8 rib 2.875 pulley $120
· Billet idler pulley's pair $75
· PARKER PUSH-LOK HOSE 1/2" WHITE 821FR-8 $2/ft
· 3rd gen Strut Tower Brace Custom $100
· DD 1x3/4 steering u-joint $50

 

pm on the brace

 

can you post pics of the fuel tank? how much for shipping it to columbus ohio 43229

 

Got pics of this?
· Billet idler pulley's pair $75

 

 

No pictures of the fuel tank as it is still in the car. My guess is the shipping will be over $100 since the fuel neck isn't removable.

 

Will it come with the sending unit for the stock fuel gauge? Any rust on it? Was it rust proofed on the inside after welding the sump?

 

Yes the stock sender and tank straps are included, no rust that I can see from underneath. The sump was coated on the outside in POR-15 when it was installed. The car has always been been stored with a full tank of fuel in a garage and a heated garage for 18 of those years. It's only seen snow once since I bought it when it was 3 years old. I can get a couple pics from underneath if that helps

 

Bump

 

Updated list