[TX] Gaging Interest: '10 SS Brembo brackets
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Houston, TX
Posts: 556
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: LT1
Transmission: T5 WC
Axle/Gears: 3.42 T2R
Gaging Interest: '10 SS Brembo brackets
I'm looking at getting some more brackets cut for my SS Brembo conversion.
The first time I got them cut (lazer) they were $28 each ($56 a pair). The holes for the caliper were accidentally cut 19/32 instead of 9/16. I'm going to get another pair cut. Of course the more I order the cheaper it gets.
These are 3/8" thick, require 1le hubs, and two .315" spacers per side.
At about 10 sets the price drops to about $30 a pair. Looking to see how many people would be interested in a set.
I'm not looking at selling complete kits, but will tell you what I used. Just looking out for the guy that wants to do it himself but needs the brackets cut.
The first time I got them cut (lazer) they were $28 each ($56 a pair). The holes for the caliper were accidentally cut 19/32 instead of 9/16. I'm going to get another pair cut. Of course the more I order the cheaper it gets.
These are 3/8" thick, require 1le hubs, and two .315" spacers per side.
At about 10 sets the price drops to about $30 a pair. Looking to see how many people would be interested in a set.
I'm not looking at selling complete kits, but will tell you what I used. Just looking out for the guy that wants to do it himself but needs the brackets cut.
#2
Supreme Member
iTrader: (7)
Join Date: Nov 2006
Location: Alamogordo, NM
Posts: 3,740
Likes: 0
Received 9 Likes
on
9 Posts
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Re: Gaging Interest: '10 SS Brembo brackets
I'm interested if we can get 10 buyers. I have this upgrade planned on my Iroc.
#3
Senior Member
Join Date: Jan 2008
Location: Massachusetts
Posts: 631
Likes: 0
Received 7 Likes
on
6 Posts
Car: 86' IROC
Engine: Supercharged 350
Transmission: T56
Axle/Gears: 3.45
Re: Gaging Interest: '10 SS Brembo brackets
What kind of wheels do we need for these? Will they fit a factory IROC wheel?
#6
Member
Re: Gaging Interest: '10 SS Brembo brackets
What does this setup push the wheel out compared to stock?
#7
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Houston, TX
Posts: 556
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: LT1
Transmission: T5 WC
Axle/Gears: 3.42 T2R
Re: Gaging Interest: '10 SS Brembo brackets
My calcs put it at +.653" each side (.318 from the 1le hub plus .335 from the rotor).
I had a 2" adapter with vette wheels previously. I'll still need an 1.25" adapter after these go on, maybe a 1.5" even.
I had a 2" adapter with vette wheels previously. I'll still need an 1.25" adapter after these go on, maybe a 1.5" even.
Thread
Thread Starter
Forum
Replies
Last Post
lugercollector
Engine/Drivetrain/Suspension Wanted
0
03-21-2016 05:23 PM
lugercollector
Engine/Drivetrain/Suspension Wanted
0
03-12-2016 07:22 PM
tpi87iroc
Engine/Drivetrain/Suspension Parts for Sale
15
03-23-2012 12:40 AM
BOTTLEDZ28
Engine/Drivetrain/Suspension Parts for Sale
3
06-10-2006 10:04 PM