Procharger D1X
Thread Starter
Junior Member
iTrader: (1)
Joined: Dec 2009
Posts: 83
Likes: 0
From: Fargo Nd
Car: 92 chevy 1/2 4 wheel drive
Engine: 5.0L with TPI
Transmission: 700R4
Axle/Gears: 3.73
Procharger D1X
D1x procharger kit Supercharger D1B rebuilt by procharger upgraded to D1X -$1800 will include Vortec blow off valve that I picked up... the Charger has belt and cog drive system included you pick which one you want to use.. If your wondering what a D1X is... according to Procharger this system is the step before a F1 procharger...
This unit is currently on my 98 K1500 pickup. can send pics and videos of unit if needed. open to offers also. Works well and haven't put more then 5,000 miles on it. 1800 is price shipped
This unit is currently on my 98 K1500 pickup. can send pics and videos of unit if needed. open to offers also. Works well and haven't put more then 5,000 miles on it. 1800 is price shipped
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Procharger D1X
D1x procharger kit Supercharger D1B rebuilt by procharger upgraded to D1X -$1800 will include Vortec blow off valve that I picked up... the Charger has belt and cog drive system included you pick which one you want to use.. If your wondering what a D1X is... according to Procharger this system is the step before a F1 procharger...
This unit is currently on my 98 K1500 pickup. can send pics and videos of unit if needed. open to offers also. Works well and haven't put more then 5,000 miles on it. 1800 is price shipped
This unit is currently on my 98 K1500 pickup. can send pics and videos of unit if needed. open to offers also. Works well and haven't put more then 5,000 miles on it. 1800 is price shipped
-- Joe
Member
iTrader: (5)
Joined: Aug 1999
Posts: 262
Likes: 2
From: Des Moines, Iowa
Car: 89 Formula
Engine: Nada - v4.0
Transmission: Nada - v3.0
Axle/Gears: Nada - v3.0
Re: Procharger D1X
So anesthes...I take it you are the one that deleted my post and the 'spirited, butt hurt' response I received from the seller.
I posted what I did in an attempt to figure out the back story on something I WAS interested in purchasing. I found the post where he purchased it while I was googling the specs for a D-1X . I was a little confused about what I saw since the original poster was too lazy to pen a new add and and just copied it from when he bought it. I didn't feel it was out of line to ask in an attempt to figure out exactly what I would be purchasing.
My bad for not being 100% clear in what my intention was; again, my bad. I was at work and time was limited so I didn't put together a long drawn out post. I guess that's my fault. I guess it's also my fault for not realizing the seller would take it the wrong way and get all defensive. If you ask me, he should realize selling schit on the InterWeb can be a PITA and suck it up.
Whatever, IDGAF anymore...peace out.
I posted what I did in an attempt to figure out the back story on something I WAS interested in purchasing. I found the post where he purchased it while I was googling the specs for a D-1X . I was a little confused about what I saw since the original poster was too lazy to pen a new add and and just copied it from when he bought it. I didn't feel it was out of line to ask in an attempt to figure out exactly what I would be purchasing.
My bad for not being 100% clear in what my intention was; again, my bad. I was at work and time was limited so I didn't put together a long drawn out post. I guess that's my fault. I guess it's also my fault for not realizing the seller would take it the wrong way and get all defensive. If you ask me, he should realize selling schit on the InterWeb can be a PITA and suck it up.
Whatever, IDGAF anymore...peace out.
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Procharger D1X
So anesthes...I take it you are the one that deleted my post and the 'spirited, butt hurt' response I received from the seller.
I posted what I did in an attempt to figure out the back story on something I WAS interested in purchasing. I found the post where he purchased it while I was googling the specs for a D-1X . I was a little confused about what I saw since the original poster was too lazy to pen a new add and and just copied it from when he bought it. I didn't feel it was out of line to ask in an attempt to figure out exactly what I would be purchasing.
My bad for not being 100% clear in what my intention was; again, my bad. I was at work and time was limited so I didn't put together a long drawn out post. I guess that's my fault. I guess it's also my fault for not realizing the seller would take it the wrong way and get all defensive. If you ask me, he should realize selling schit on the InterWeb can be a PITA and suck it up.
Whatever, IDGAF anymore...peace out.
I posted what I did in an attempt to figure out the back story on something I WAS interested in purchasing. I found the post where he purchased it while I was googling the specs for a D-1X . I was a little confused about what I saw since the original poster was too lazy to pen a new add and and just copied it from when he bought it. I didn't feel it was out of line to ask in an attempt to figure out exactly what I would be purchasing.
My bad for not being 100% clear in what my intention was; again, my bad. I was at work and time was limited so I didn't put together a long drawn out post. I guess that's my fault. I guess it's also my fault for not realizing the seller would take it the wrong way and get all defensive. If you ask me, he should realize selling schit on the InterWeb can be a PITA and suck it up.
Whatever, IDGAF anymore...peace out.
I'm not a moderator on this forum.
I cannot delete posts in forums that I'm not a moderator on..
Please leave me out of it. All I did was ask for a picture.
Member
iTrader: (5)
Joined: Aug 1999
Posts: 262
Likes: 2
From: Des Moines, Iowa
Car: 89 Formula
Engine: Nada - v4.0
Transmission: Nada - v3.0
Axle/Gears: Nada - v3.0
Re: Procharger D1X
Understood, and I apologize for jumping to the conclusion it was you. As someone that has been a Moderator on several Boards over the years, IMO if agent13 is going to delete posts, one would asssssume an explanation would be common courtesy.
Member
iTrader: (5)
Joined: Aug 1999
Posts: 262
Likes: 2
From: Des Moines, Iowa
Car: 89 Formula
Engine: Nada - v4.0
Transmission: Nada - v3.0
Axle/Gears: Nada - v3.0
Re: Procharger D1X
I just noticed that I've been a part of this UBB/Board/community for 14 years longer than the agent13 and I get posts deleted because someone with thin skin took offense to the questions of a serious buyer and that has 14+ years as a member of this board (and that does not even count the years before the UBB software was used) WTF agent13...............................
Sounds like more than one member has thin skin........................
I'm out. Peace. GLWTS...............................
Sounds like more than one member has thin skin........................
I'm out. Peace. GLWTS...............................
Last edited by 96BlownSSragtop; Jul 7, 2016 at 11:03 PM.
Trending Topics
Supreme Member
iTrader: (17)
Joined: Nov 2005
Posts: 1,104
Likes: 2
From: Leicester,Massachusetts
Car: 1983 CHEVROLET CAMARO Z28
Engine: Forged 355 with a GT45 turbo
Transmission: TKO 600
Axle/Gears: built 4th gen rear with 3.27s
Re: Procharger D1X
If I didn't have a twin turbo setup I would buy this.
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Supreme Member
iTrader: (17)
Joined: Nov 2005
Posts: 1,104
Likes: 2
From: Leicester,Massachusetts
Car: 1983 CHEVROLET CAMARO Z28
Engine: Forged 355 with a GT45 turbo
Transmission: TKO 600
Axle/Gears: built 4th gen rear with 3.27s
Re: Procharger D1X
All of my stuff is coated....No melting of the hood here. Back on topic. Any pictures of the setup?
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Procharger D1X
If you are interested I can forward them to you.
He apparently also has a cog setup, which solves the belt tossing problem I had.
-- Joe
Supreme Member
iTrader: (17)
Joined: Nov 2005
Posts: 1,104
Likes: 2
From: Leicester,Massachusetts
Car: 1983 CHEVROLET CAMARO Z28
Engine: Forged 355 with a GT45 turbo
Transmission: TKO 600
Axle/Gears: built 4th gen rear with 3.27s
Re: Procharger D1X
Trades for a twin turbo setup?
Senior Member

Joined: Feb 2008
Posts: 706
Likes: 0
From: Central PA
Car: 1990 IROC
Engine: Rebuilt L98 with H/C/I/Carb
Transmission: TH350 with ATI Treemaster
Axle/Gears: 7.5 with 4.10's
Re: Procharger D1X
How did I miss this? Let me know if still available. Will work great in my 1979 GMC project truck.
Thread Starter
Junior Member
iTrader: (1)
Joined: Dec 2009
Posts: 83
Likes: 0
From: Fargo Nd
Car: 92 chevy 1/2 4 wheel drive
Engine: 5.0L with TPI
Transmission: 700R4
Axle/Gears: 3.73
Re: Procharger D1X
Today was the first notification i got that someone replied to this
Supreme Member
iTrader: (1)
Joined: Dec 2002
Posts: 1,391
Likes: 66
From: MA
Car: 1989 IrocZ
Engine: 421 Dart Stroker
Transmission: 4L60E Cahall Performance Built
Axle/Gears: Midwest Chassis Fab 9/ 3.55 gears
Re: Procharger D1X
Can you post pictures? Interested. Thank you
Supreme Member
iTrader: (1)
Joined: Dec 2002
Posts: 1,391
Likes: 66
From: MA
Car: 1989 IrocZ
Engine: 421 Dart Stroker
Transmission: 4L60E Cahall Performance Built
Axle/Gears: Midwest Chassis Fab 9/ 3.55 gears
Supreme Member
iTrader: (1)
Joined: Dec 2002
Posts: 1,391
Likes: 66
From: MA
Car: 1989 IrocZ
Engine: 421 Dart Stroker
Transmission: 4L60E Cahall Performance Built
Axle/Gears: Midwest Chassis Fab 9/ 3.55 gears
Re: Procharger D1X
Was never marked sold. OP said he though he did , but he didnt. Maybe you should read the post.








