Looking for complete TPI swap stuff (MA)
Thread Starter
Member
iTrader: (1)
Joined: Jul 2006
Posts: 129
Likes: 0
From: Stoughton, MA
Engine: 5.7 vortec crate w/TPI
Transmission: 2004r
Axle/Gears: 3.42
Looking for complete TPI swap stuff (MA)
I'm looking for as complete a TPI setup as possible for my swap.
I'd prefer MAF, but SD is ok too as long as it doesn't have VATS on it.
I'd also need the engine harness to be complete and all original with no cut wires or missing sensors.
Preferably a 350 setup, but 305 would be ok too.
Also, I'd like to get the TV cable and bracket, accessories, fan, etc.
if anyone had a complete parts car I'd be interested in that as well.
I'm located in MA.
Thanks
I'd prefer MAF, but SD is ok too as long as it doesn't have VATS on it.
I'd also need the engine harness to be complete and all original with no cut wires or missing sensors.
Preferably a 350 setup, but 305 would be ok too.
Also, I'd like to get the TV cable and bracket, accessories, fan, etc.
if anyone had a complete parts car I'd be interested in that as well.
I'm located in MA.
Thanks
Junior Member
iTrader: (1)
Joined: Apr 2006
Posts: 93
Likes: 0
From: Del Co, Pa
Car: 1986 IROC
Engine: 5.7L L98
TPI set up
I have the TPI set for a 305, this is an early style set up that can be used on pre 1985 350's
ECM w/ wiring
runners
fuel rails w/ injectors
manifold
plenuim
throttle body
this was used with a MAF setup
I do not have MAF or SD to include
can provide pics later today if you need them.
I am near Philadelphia.
do have some other items if you need them.
Harry
ECM w/ wiring
runners
fuel rails w/ injectors
manifold
plenuim
throttle body
this was used with a MAF setup
I do not have MAF or SD to include
can provide pics later today if you need them.
I am near Philadelphia.
do have some other items if you need them.
Harry
Thread Starter
Member
iTrader: (1)
Joined: Jul 2006
Posts: 129
Likes: 0
From: Stoughton, MA
Engine: 5.7 vortec crate w/TPI
Transmission: 2004r
Axle/Gears: 3.42
Is this the 1985 setup?
I'm really more interested in 86+, but I'll keep it in mind if it is an 85 harness.
Dave
I'm really more interested in 86+, but I'll keep it in mind if it is an 85 harness.
Dave
Supreme Member
iTrader: (27)
Joined: Jan 2006
Posts: 1,477
Likes: 0
From: Ct
Car: 1989 Iroc, 1987and 1989 formula 350
Engine: 305tpi,350tpi,ls1
Transmission: 700r4,t-56
Axle/Gears: 3:08,3:27,3:23
Originally Posted by SS ninja
I'm looking for as complete a TPI setup as possible for my swap.
I'd prefer MAF, but SD is ok too as long as it doesn't have VATS on it.
I'd also need the engine harness to be complete and all original with no cut wires or missing sensors.
Preferably a 350 setup, but 305 would be ok too.
Also, I'd like to get the TV cable and bracket, accessories, fan, etc.
if anyone had a complete parts car I'd be interested in that as well.
I'm located in MA.
Thanks
I'd prefer MAF, but SD is ok too as long as it doesn't have VATS on it.
I'd also need the engine harness to be complete and all original with no cut wires or missing sensors.
Preferably a 350 setup, but 305 would be ok too.
Also, I'd like to get the TV cable and bracket, accessories, fan, etc.
if anyone had a complete parts car I'd be interested in that as well.
I'm located in MA.
Thanks
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
i have a 88 formula that i am cutting up for parts...its a tpi auto car...
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
https://www.thirdgen.org/forums/engi...verything.html
ive got most of what you need. the wiring harness is now cut up, but i got the computer brand new with a brand new chip.
ive got most of what you need. the wiring harness is now cut up, but i got the computer brand new with a brand new chip.
Trending Topics
Junior Member
Joined: May 2004
Posts: 8
Likes: 0
From: emporium pa
Car: 89 iroc-z
Engine: 355
Transmission: 700r4
hi i have a complete intake up dfi gen 6 accel 350 street ram 1000cfm throttle body, harness and ecu. let me know if interested chucku@adelphia.net
Junior Member
Joined: Mar 2005
Posts: 41
Likes: 0
From: greenfield, CA.
Car: 1984 camaro
Engine: 426 stroker sbc
Transmission: 700r4
parts
i have a new painless harness ill sell for 250 or the whole intake and harness for 500
Last edited by biff76111; Aug 25, 2006 at 11:28 AM. Reason: to add more
Junior Member
Joined: Sep 2006
Posts: 3
Likes: 0
have a 88 complete 350 tpi setup from an iroc camaro will sell everything from air intake to ecm e-mail me blackz28ride@yahoo.com if interested
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
