Hey everyone,

here is a list of things im looking for:

Heads: low 70cc chambers, or high 60's. 180 - 195cc intake flow. Centerbolt covers preferred, but not important. Aluminum or iron, alminum preffered though. Dont want any stock heads, unless their off a vette.

Crank: Looking for a stoker Crank for a 350. (to make a 383)

Rods: Forged, or shot peened rods (for 383)

Pistons: Hyperneutectic or forged flat tops. (2 or 4 vavle releifs)

Cam: Hotcam, or hydraulic roller voodoo cam. or something along those lines

Rockers: Steel or alum roller rockers, (no tipper rockers)

TPI Parts: High flow base, runners, tb air foils, better tbs etc.

sheldon@twistedcrank.com with part discription, pictures if possible.

thanks!

Sheldon

 

I have a set of 2.02\ 1.6 heads #882 of 1974 corvette need to be reassembled but otherwise in great shape just got them back from Cornett's Racing milled .030 should make the cc around 68 to 70 oringinally 76 I bought the valve kit from Cornett's includes stainless valves springs good for.550 lift 7 degree locks and if you need them comp cams magnum rollor rockers 1.6 all this for $350 plus $50 shipping. No longer need them.

 

have a new unused set of comp cam pro magnum steel rockers 1.52 ratio. part#1301-16.
$240 shipped

 

Have a set of used JE/SRP pistons( SRP-138089)mounted on redone chevy rods that have ARP bolts.VGC. $300 plus ship

 

i have a set of Comp cams pro magnum 1.6 rocker arms for 3/8stud.......175+shipping used for 5k miles installed august of 05