Looking for proformance cam...
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2007
Posts: 37
Likes: 0
From: Sykesville, MD
Car: 91 Camaro z28
Engine: TPI 350
Transmission: 700r4
Axle/Gears: 3.23 open
Looking for proformance cam...
I have a 91 z28 with a 350 TPI... Im looking for a proformance camshaft. If anyone can help me out please contact me!
Senior Member
iTrader: (3)
Joined: Mar 2006
Posts: 690
Likes: 0
From: NY
Car: 86 Iroc
Engine: 383
Transmission: TH350
Axle/Gears: 3:73s!
The lift on the intake/exhaust is a .440
The duration is 266*
I dont remember the RPM range, but i think it was 1600 to 5500
I dont have the lifters, its just the camshaft.
The duration is 266*
I dont remember the RPM range, but i think it was 1600 to 5500
I dont have the lifters, its just the camshaft.
Last edited by 86camaro383; Mar 19, 2007 at 09:55 PM.
Member
iTrader: (8)
Joined: Sep 2004
Posts: 484
Likes: 0
From: Long Island, NY
Car: 84 Z28
Engine: L69HO
Transmission: T-5
Axle/Gears: 3:73
91 350 is a Roller motor, so you need a Roller Cam....Flat tappet won't work, FYI. Best bet would be to get a ZZ4 Cam off ebay, they are cheap, like $125 bucks NEW takeouts.
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2007
Posts: 37
Likes: 0
From: Sykesville, MD
Car: 91 Camaro z28
Engine: TPI 350
Transmission: 700r4
Axle/Gears: 3.23 open
Junior Member
Joined: Jul 2004
Posts: 84
Likes: 0
From: New Stanton, PA
Car: 83 camaro sport coupe/ 1981 Camaro
Engine: 2.8 2bbl
Transmission: thm200c
If you are running bone stock heads you can't run a zz4 cam, you will need different valve springs, and may also need long slot zz4 rockers.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM