Attn Connecticut guys: Need spindles!!!
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Attn Connecticut guys: Need spindles!!!
Hi fellas...I'm in New Haven until Thursday of next week and I'll take spindle sets if you guys have them available and I don't have to pull them off, I'll pick up.
Please let me know..thanks!
Ed
Please let me know..thanks!
Ed
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Attn Connecticut guys: Need spindles!!!
Hey Ed -
I'm still in need of a pair of a pair of modified spindles for the 98-UP conversion. Think we can work out a deal ? The box you sent with the brackets is still sitting unopened on the shelf 'cause I've had so many other things to wrench on since getting your stuff. We had worked out a deal for a pair of upgrade spindles then - but that was then !
I'm sure your schedule will change a lot from now till Thursday - but maybe we can meet up at some point from now till then ?
I'm sitting on 2 possibly 3 pairs of factory Spindles right now. I'll be working out there later today and tonight so I'll take a look in the yard then. Once I know for sure what I've got I'll post an update here.
I'm still in need of a pair of a pair of modified spindles for the 98-UP conversion. Think we can work out a deal ? The box you sent with the brackets is still sitting unopened on the shelf 'cause I've had so many other things to wrench on since getting your stuff. We had worked out a deal for a pair of upgrade spindles then - but that was then !
I'm sure your schedule will change a lot from now till Thursday - but maybe we can meet up at some point from now till then ?
I'm sitting on 2 possibly 3 pairs of factory Spindles right now. I'll be working out there later today and tonight so I'll take a look in the yard then. Once I know for sure what I've got I'll post an update here.
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Attn Connecticut guys: Need spindles!!!
Please do, thanks John. I'm actually leaving on Wednesday but hopefully we can work something out...maybe meet up in the Groton area?
Ed
Ed
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Attn Connecticut guys: Need spindles!!!
Jusr a quick update:
I found 2 sets of spindles removed from the cars and have one set still installed. I've got some time tomorrow and will try to remove the struts from the sets that are out of the car already and If I've got enough time I'll try to get the set off the car as well.
I'm not sure if I am 'working' Tuesday or not - but will send you another update tomorrow and let you know if I'm sucessfull in stripping the stuff down to just the spindles.
Meeting someplace in CT is not a problem for me and it seems as if Tuesday will be the best time to meet since your Leaving on Wednesday. I'll post an update here as soon as I have more to report !
I found 2 sets of spindles removed from the cars and have one set still installed. I've got some time tomorrow and will try to remove the struts from the sets that are out of the car already and If I've got enough time I'll try to get the set off the car as well.
I'm not sure if I am 'working' Tuesday or not - but will send you another update tomorrow and let you know if I'm sucessfull in stripping the stuff down to just the spindles.
Meeting someplace in CT is not a problem for me and it seems as if Tuesday will be the best time to meet since your Leaving on Wednesday. I'll post an update here as soon as I have more to report !
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Attn Connecticut guys: Need spindles!!!
Hi John...I forgot the dates and I'm leaving on Tuesday..any chance we can get together this evening? I'll PM you.
Ed
Ed
Joined: Jul 1999
Posts: 1,992
Likes: 10
From: CT
Car: 1986 Camaro SC
Engine: 305 TPI Procharged D1SC
Transmission: Tremec TKO-600
Axle/Gears: Moser 12 Bolt 3.73 posi
Re: Attn Connecticut guys: Need spindles!!!
hey ed what are you looking to spend on the spindles? i have a pair off an 85 z28 that i dont need, i'm in vernon, ct
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Attn Connecticut guys: Need spindles!!!
I give $40 per pair, plus shipping of course. Please LMK if this will work, I can Paypal you or send a MO.
Thanks!
Ed
Thanks!
Ed
Trending Topics
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: Attn Connecticut guys: Need spindles!!!
still have them all plus i found the box with 4 more in it that was packed the last time
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Attn Connecticut guys: Need spindles!!!
Thanks Ted, I'll get with you.
Ed
Ed
Thread
Thread Starter
Forum
Replies
Last Post
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
8
Sep 25, 2015 04:56 PM
rb85TA
Organized Drag Racing and Autocross
26
Sep 14, 2015 10:29 PM






