Dual snorkel flex ducts
Thread Starter
Member
iTrader: (5)
Joined: Apr 2006
Posts: 121
Likes: 0
Car: 1985 Monte Carlo SS
Engine: 5.7L
Transmission: WC T-5
Axle/Gears: 3.73:1
Dual snorkel flex ducts
Looking for the flex ducts found on the dual snorkel Camaros. If anyone has a set, or knows where they can be bought new, give me a shout 
GM P/N 14073299
GM P/N 14083990
These should be wider at the breather end compared to the snorkel end:
http://www.montecarloss.com/HO_Snorkels.jpg

GM P/N 14073299
GM P/N 14083990
These should be wider at the breather end compared to the snorkel end:
http://www.montecarloss.com/HO_Snorkels.jpg
Senior Member
iTrader: (1)
Joined: Sep 2007
Posts: 914
Likes: 1
From: New Philadelphia/ Canton OH
Car: 1991 RS, 84 El Camino conquista RIP
Engine: 5.0 (for now)
Transmission: 4L60
Axle/Gears: 2.xx torsen limited slip & 3.42 ope
Re: Dual snorkel flex ducts
year one has them
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Thread Starter
Member
iTrader: (5)
Joined: Apr 2006
Posts: 121
Likes: 0
Car: 1985 Monte Carlo SS
Engine: 5.7L
Transmission: WC T-5
Axle/Gears: 3.73:1
Re: Dual snorkel flex ducts
Ryan - do you happen to have a PN for the ones at year one?
James - I've been on the ramair site and they have some flex ducts, but they don't look like the factory ones. I tried to email them through their website, but it doesn't work. Too bad, because I can even pick up from there and avoid their insane shipping costs.
James - I've been on the ramair site and they have some flex ducts, but they don't look like the factory ones. I tried to email them through their website, but it doesn't work. Too bad, because I can even pick up from there and avoid their insane shipping costs.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Dual snorkel flex ducts
Year One:
AC9RH
1983-1987 Camaro/Firebird passenger side fresh air hose.
$33.95
I've "heard" you can flip them to fit both sides (though the pass side does have a plastic protective pieces on the bottom side--which i suppose you could remove).
JamesC
AC9RH
1983-1987 Camaro/Firebird passenger side fresh air hose.
$33.95
I've "heard" you can flip them to fit both sides (though the pass side does have a plastic protective pieces on the bottom side--which i suppose you could remove).
JamesC
Thread Starter
Member
iTrader: (5)
Joined: Apr 2006
Posts: 121
Likes: 0
Car: 1985 Monte Carlo SS
Engine: 5.7L
Transmission: WC T-5
Axle/Gears: 3.73:1
Re: Dual snorkel flex ducts
Thanks - now I just need to find out if they'll ship to Canada through USPS 
Pricey for what it is, but there aren't too many options out there!

Pricey for what it is, but there aren't too many options out there!
Trending Topics
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Dual snorkel flex ducts
I know what you mean; however, I was lucky enough to purchase the scoops and ducts new from GM a few years ago. Actually, I really liked the set-up. I replaced both vac motors and heat sensor in the air box, bought new ducts/scoops and a handful of hangers and rods, tweaked the air valve tension on the old Q-jet, and along with other mods, the old LG4 ran pretty well. Swapped it out for a 350/330 with a Holley and the L69 set-up would no longer work. I've kept it because I know I'll never find another complete one.
JamesC
JamesC
Member
iTrader: (1)
Joined: Apr 2005
Posts: 467
Likes: 0
From: Ontario, Canada
Car: 86 Trans Am
Engine: 385 Fast Burn
Transmission: 700R4 - stock (eep!)
Axle/Gears: Stock, will upgrade at some point
Re: Dual snorkel flex ducts
I tried to email them through their website, but it doesn't work
If that doesn't work I clicked the link myself and this is their email addy:
ais@ramairbox.com
Thread Starter
Member
iTrader: (5)
Joined: Apr 2006
Posts: 121
Likes: 0
Car: 1985 Monte Carlo SS
Engine: 5.7L
Transmission: WC T-5
Axle/Gears: 3.73:1
Re: Dual snorkel flex ducts
I had the same problem and I was just trying to email them only yesterday. Try the other link at the top that says contact us - THAT one opens your email program with their email addy already filled in.
If that doesn't work I clicked the link myself and this is their email addy:
ais@ramairbox.com
If that doesn't work I clicked the link myself and this is their email addy:
ais@ramairbox.com
Last edited by 85_SS; Apr 3, 2008 at 07:33 AM.
Thread Starter
Member
iTrader: (5)
Joined: Apr 2006
Posts: 121
Likes: 0
Car: 1985 Monte Carlo SS
Engine: 5.7L
Transmission: WC T-5
Axle/Gears: 3.73:1
Re: Dual snorkel flex ducts
Wow, ramairbox wants $77.90 + Ship. + Taxes!! for PN#990 (for the factory air cleaner). If Year One won't ship to Canada, I'll stick with the SS ducts I have on there now.
Re: Dual snorkel flex ducts
https://www.thirdgen.org/forums/engi...ake-hoses.html
Dual Snorkel Intake Hoses 19"
Details :
19" Flexible Thermoplastic Alloy Tubing, reinforced with galvanized steel wire for durability. Temperature Resistant from -40° F to +250° F.
I see a lot of people asking for these hoses when someone lists a Dual Snorkel setup.
I figured I would let you guys here know about them.
I don't have that many. Just trying to Help some fellow Chevy Guys out if all.
email me @ jamie_ewing@msn.com for any questions or pm me.
I have these listed on ebay too. http://cgi.ebay.com/ebaymotors/ws/eB...m=300216190101
I should of listed them here first and saved some loot.
But I'll sell em to you guys here for $35 shipped in US. Thanks!!
Dual Snorkel Intake Hoses 19"
Details :
19" Flexible Thermoplastic Alloy Tubing, reinforced with galvanized steel wire for durability. Temperature Resistant from -40° F to +250° F.
I see a lot of people asking for these hoses when someone lists a Dual Snorkel setup.
I figured I would let you guys here know about them.
I don't have that many. Just trying to Help some fellow Chevy Guys out if all.
email me @ jamie_ewing@msn.com for any questions or pm me.
I have these listed on ebay too. http://cgi.ebay.com/ebaymotors/ws/eB...m=300216190101
I should of listed them here first and saved some loot.
But I'll sell em to you guys here for $35 shipped in US. Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post








