Looking to complete my 350 for my 84 Trans am. Need a bit of parts.

Need:
- Good Heads Prefer older heads, need to be rust free for zz4 block
- ZZ4 cam, anywhere from stock to mild
- Balanced 350 Crank, stock is fine, needs to be CLEAN, 1pc.
- Matched Bearings for said crank (May just buy from summit)
- Roller lifters for a stock roller block
- Spider Galley and Dog bones for roller block
- Edelbrock Performer Intake, needs to fit a rochester 4bbl
- Oil pan for Post-86 Block
- 1 Pc. RMS flywheel
- Flex Fan (Not stock junk)
- 350 Damper for 1pc RMS crank
- Hardened O/P shaft
- Anything else you think Ide need for this block.

Please post your prices shipped.
I can pay, or trade for them, I have many random parts, just ask!

Thanks.

 

i have the spider vally and all 8 dogbones what would offer as a trade. i also have a weiand xcelerater intake needs a good cleaning but i could do that for you and give it a nice coat of hamer silver rustolion paint. i have another one i did that 2 and it looks better than new. it will bolt to an edelbrock or a holley carb but is for the older heads. i also have a couple sets of heads one set is the 882 head 76cc 2.02s need to be sent through a parts cleaner but still came off a running 400. i am in need of an msd coil and a electric fuel pump along with an edelbrock 1406 carb possible trade? let me know what you have

 

I believe I have that carb, but thats it. I dont feel comfortable doing ''Thru-Mail'' Trades, thats more of an ''In-Person'' Thing. I AM interested in the Spider and Bones, How much on them?

 

$30 shipped

 

Pm'd

--------------------
Up.

 

Up
-----------
Updated List:
Need:
- Good Heads Prefer older heads, need to be rust free for zz4 block/Pending
- ZZ4 cam, anywhere from stock to mild/Pending
- Balanced 350 Crank, stock is fine, needs to be CLEAN, 1pc.
- Matched Bearings for said crank (May just buy from summit)
- Roller lifters for a stock roller block/Pending
- Spider Galley and Dog bones for roller block/Pending
- Edelbrock Performer Intake, needs to fit a rochester 4bbl
- Oil pan for Post-86 Block
- 1 Pc. RMS flywheel
- Flex Fan (Not stock junk)
- 350 Damper for 1pc RMS crank
- Hardened O/P shaft
- Roller Cam Fuel Pump Rod

 

Iv got a set of double hump heads that just got a fresh valve job on them. Ill get casting number and all, they were not the 202 valve heads but they were some nice heads. Their at the machine shop guy wants 300 bucks for the fresh valve job, you pay me 350 plus shipping you can have the pair. (im only getting 50 dollars so the machinest dont keep them since I bought some dart heads instead and want them to go to a good home)

 

I have a set of stock 350 heads, they only have about 150 miles on them, (i switched to aluminum heads) they had new valve job, new seals, new guides, and new seats put in them. they work very well $100.00+ shipping LMK if interested.

thanks


and also i do have bearings, i am assuming that you need both rod and mains, and what size did you need?

 

Appreciate the offer, but a little out of my range, plus On double humps, Im worried about accessory bolt holes.
----------
These I may be interested in, Please get me some pics and information.
Bradley23150@yahoo.com
----------
No longer need:
Spider Galley
Dog bones
Cam
Lifters

Still need rest!!

 

I have a set of "882" Heads. I bought a 79' 400 that they were on, and Im building the motor and going with Aluminum Heads. How does $75 + Shipping sound? Im not sure if they have every had work done to them, but the engine was recently rebuilt to stock specs about 15k before I bought it.

 

The casting numbers on the heads are 333882 and mortech lists them as 333882.....74-80...350/400......76cc chambers, i dont have a digi cam, but garuentee to be what they are, they do need to be cleand and re-painted. very good head for the money. LMK if still interested!

 

Sorry, but Ill pass on both of these offers, Im pretty sure that 882 heads are the last things Ide consider. Thanks though!

 

No problem man, with old school double humps I used alan grove alt brackets to move the alt ti a mid section and didnt need acc holes! Just throwing it out their for your info.

 

Ide like to keep all my v-be;t stuff as-is, thanks though.
---------------------
Updated List:
Need:
- Good Heads Prefer older heads, need to be rust free for zz4 block/Pending
- Balanced 350 Crank, stock is fine, needs to be CLEAN, 1pc.
- Matched Bearings for said crank (May just buy from summit)
- Edelbrock Performer Intake, needs to fit a rochester 4bbl
- Oil pan for Post-86 Block
- 1 Pc. RMS flywheel
- Flex Fan (Not stock junk)
- 350 Damper for 1pc RMS crank
- Hardened O/P shaft
- Roller Cam Fuel Pump Rod

 

i've got a set of 083s 180 + shipping if you want them. I bought them off the forum but things have changed and i'm goin in a differnt direction.

 

Oh I got a performer rpm intake square bore pre 86 heads no egr. 75 plus shipping?

 

Ive got a stock crank and an oil pan 50 dollars plus shipping

 

Pictures Please.

 

i will get them tomorrow and post them up.their out in my shed where theres no light

 

Heres the pics i promised














I also have an underdrive crank pulley if your intrested

 

 

 

How about a set of 376450 heads? Apparently they are a favorite among some roundy round racers. They have been ported and came off of a well-running 350, but they have been sitting in my garage for 5 or 6 years, so I'm sure they need valve seals now.

 

Sending you guys PM's.

 

i have some EDELBROCK PERFORMER RPM heads
64cc chamber, strait plugs, comes with orginal assembled valves and springs,
2.02 intake valves. also comes with erson 1.5 roller rockers, arp bolts, chrome valve covers,and pushrods. my car went 10.8 with these heads
800$ shipped

 

I have A Performer or a professional products Both new $75.00 each

 

I have a set of 041X sbc heads that are bare. took them apart along with another set that i have and made one good econmy set for my 63 conv. nova. these are good hp heads, they are bare but the price is right at 150, these have factory 165 cc intake runners so 400 hp is easy to surpass. came on dz302,350 corvettes and have accessory holes.

But i'm is so cal

 

pm sent

 

I've got some used roller lifters with spider and dogbones (you'd just need a retainer) and also a practically new Summit brand balancer. All $175 shipped.

 

No thanks, got them already.

Updated List:
- Matched Bearings for said crank (May just buy from summit)
- Edelbrock Performer Intake, needs to fit a rochester 4bbl
- 1 Pc. RMS flywheel
- Flex Fan (Not stock junk)
- Hardened O/P shaft
- Roller Cam Fuel Pump Rod
- 1.5 rockers

 

Alright, got most of the parts I needed, these are the parts I need ASAP.

Updated List:

- Vortec Edelbrock Performer Intake, needs to fit a rochester 4bbl
- 1 Pc. RMS flywheel
- Flex Fan (Not stock junk)

Post up what ya got, Im trying to get this motor going.

Thanks

 

I have a 1 pc RMS flywheel (not flexplate). Never used, still in the box. I can provide photos later this evening.

 

I didnt know that a flywheel and a flexplate were 2 different things?

I need the big round thing with the teeth on it that bolts to the torque converter, lol.

 

Yeah, flywheel is a balanced steel plate that the pressure plate mounts to for a manual trans, where a flexplate bolts to the t/c for automatic. It's common for guys to say flywheel for flexplate. At the local AAP they go for ~40-50 bucks.

 

I've a brand new flexplate for 1 piece RMS never used for $35.00. Can't get photos 'til tomorrow night.
Jon