[NJ] 350 sbc needed for 88 GTA
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
350 sbc needed for 88 GTA
my 305 bit the dust last year so i'm looking to upgrade. i need a 350 that works with TPI. i live in New Jersey so a seller in the same state would be prefered as i would be picking it up. if not hopefully we can make a deal on shipping.
thank you.
thank you.
#2
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: 350 sbc needed for 88 GTA
I have a 69 camaro 350 010 short block for sale. 400 bucks Pm me for more info. Short block as in you need heads/top end, reuse your 305 stuff=higher compression good power, or get a set of cheap 350 heads and reuse your intake and stuff either way both good options.
#4
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: 350 sbc needed for 88 GTA
" 78 monte
I put 305 heads on a 350 with dished pistons.With a mild cam ,4bbl and headers.The motor ran like a raped ape.Comp was probably around 9.5:1 w/ dished pistons."
http://www.hotrodders.com/forum/305-...50-a-2730.html
Quick google search and a few threads say YAY and some say nay.
58 cc combustion chambers make for more power. clean them up(porting) maybe bigger valves and ur golden or like I said 350 heads(you can get a set of basic heads in good condition for 50-100 bucks!)
I put 305 heads on a 350 with dished pistons.With a mild cam ,4bbl and headers.The motor ran like a raped ape.Comp was probably around 9.5:1 w/ dished pistons."
http://www.hotrodders.com/forum/305-...50-a-2730.html
Quick google search and a few threads say YAY and some say nay.
58 cc combustion chambers make for more power. clean them up(porting) maybe bigger valves and ur golden or like I said 350 heads(you can get a set of basic heads in good condition for 50-100 bucks!)
#5
Member
iTrader: (26)
Join Date: Jan 2000
Location: NY zip 12538
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Car: way too many
Engine: 283s to 454s
Transmission: autos and sticks
Re: 350 sbc needed for 88 GTA
I have a 1988 L98 longblock from a GTA, was a running engine that has been sitting in storage a couple years so consider it a good core to build, lower end is good ran with no knocks or noises. $150 pick up in NY zip 12538 not far from NJ.
#6
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: 350 sbc needed for 88 GTA
hey droptop70ss, just sent you a PM!
#7
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: 350 sbc needed for 88 GTA
hey guys, i'm still looking for an engine!
Trending Topics
#8
Member
iTrader: (26)
Join Date: Jan 2000
Location: NY zip 12538
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Car: way too many
Engine: 283s to 454s
Transmission: autos and sticks
Re: 350 sbc needed for 88 GTA
my 88 L98 is still here, thought you were going to pick it up and then never heard back?
#9
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: 350 sbc needed for 88 GTA
bump still looking for one.
#10
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Northern New Jersey
Posts: 640
Received 0 Likes
on
0 Posts
Car: 1988 Trans am GTA
Engine: corvette 350 swap
Transmission: t-5 swap
Axle/Gears: 3.27:1 borg warner 9-bolt w/ PBRs
Re: 350 sbc needed for 88 GTA
still looking for an 350 engine for my 88 GTA or a Gen 1 vortec 350 from a chevy van from around 1993!!! please help i need to get this done by august!
Last edited by GTAman; 07-09-2009 at 04:05 PM. Reason: added option
#11
Junior Member
iTrader: (1)
Join Date: Jan 2008
Location: Lansing, Michigan
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90,94,96 C4, 93 F 07 K3500
Engine: L98, LT1
Transmission: M6
Re: 350 sbc needed for 88 GTA
I have a 91 C4 L98 shortblock I will sell for 150.00. I also have another 91 C4 L98 shortblock that is fresh that I want $800.00. Unfortunatly I am in Michigan.
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
08-23-2015 11:49 AM