[ON] WTB: Left rear sub frame 87 IROC

Thread Tools
 
Search this Thread
 
Old Jun 10, 2009 | 04:20 PM
  #1  
KnottyBuoyz's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Apr 2009
Posts: 388
Likes: 0
From: Iroquois, ON
Car: 87 IROC-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Not sure, gotta look it up
WTB: Left rear sub frame 87 IROC

I'm looking for a left rear sub frame for an 87 Camaro. Not the complete sub frame but about half way up the hump to where it transitions into the floor pan. See pic.



I'd need a good margin from around the frame, at least an inch. Don't worry about any floor attached to it, I'll deal with that. It has to be "SOLID" preferably no rust if possible. Color doesn't matter. Willing to pay a reasonable price plus shipping from anywhere.

Thanks in advance for helping out fella's. See my rusty reno thread in my sig.
Reply
Old Jun 14, 2009 | 01:39 PM
  #2  
KnottyBuoyz's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Apr 2009
Posts: 388
Likes: 0
From: Iroquois, ON
Car: 87 IROC-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Not sure, gotta look it up
Re: WTB: Left rear sub frame 87 IROC

Urgent! If anybody's slicing up an 82-92 Camaro or Bird I need a donor part for my restoration project ASAP. Willing to pay a reasonable price for a good part plus all shipping costs etc.
Reply
Old Jun 14, 2009 | 02:27 PM
  #3  
dave mc's Avatar
Member
iTrader: (62)
 
Joined: Jun 2005
Posts: 219
Likes: 2
From: milwaukee
Car: 87gta 88gta 88marovert
Re: WTB: Left rear sub frame 87 IROC

I’m parting out a 87 camaro the car had some rust but I believe that section is still good. I just don’t know what to charge for it I figure it’s going to take to sawsaw blades and 30 minutes to an hour. I’d have to get 60 bucks + shipping I cant figure out the shipping until it’s cut out.
Reply
Old Jun 14, 2009 | 02:33 PM
  #4  
KnottyBuoyz's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Apr 2009
Posts: 388
Likes: 0
From: Iroquois, ON
Car: 87 IROC-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Not sure, gotta look it up
Re: WTB: Left rear sub frame 87 IROC

Originally Posted by dave mc
I’m parting out a 87 camaro the car had some rust but I believe that section is still good. I just don’t know what to charge for it I figure it’s going to take to sawsaw blades and 30 minutes to an hour. I’d have to get 60 bucks + shipping I cant figure out the shipping until it’s cut out.
Sounds like a good deal Dave. I'd reimburse you for the sawblades too!

Take as large a margin as you can get but I'd need at least an inch all around. Go as high up the curve as you can get too at least to the bolt hole for the fuel line. You'll see it. It's gotta be solid enough to spot weld into place. Cosmetics don't matter it'll be undercoated afterwards.

To get a quote on shipping it'd be going to:

The UPS Store
2981 Ford St. Extension
Ogdensburg, NY 13669

Rick
Reply
Old Jun 14, 2009 | 02:43 PM
  #5  
dave mc's Avatar
Member
iTrader: (62)
 
Joined: Jun 2005
Posts: 219
Likes: 2
From: milwaukee
Car: 87gta 88gta 88marovert
Re: WTB: Left rear sub frame 87 IROC

Finding someplace to get a shipping quit isn’t the problem it’s guessing about the weight and size of the box. I don’t like the ideal of spending my time cutting it out and then not getting paid because shipping is to hi. Normally anything like these would require a payment up front.
Reply
Old Jun 14, 2009 | 02:47 PM
  #6  
KnottyBuoyz's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Apr 2009
Posts: 388
Likes: 0
From: Iroquois, ON
Car: 87 IROC-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Not sure, gotta look it up
Re: WTB: Left rear sub frame 87 IROC

Originally Posted by dave mc
Finding someplace to get a shipping quit isn’t the problem it’s guessing about the weight and size of the box. I don’t like the ideal of spending my time cutting it out and then not getting paid because shipping is to hi. Normally anything like these would require a payment up front.
I understand Dave. You can check my feedback on e-Bay as a buyer.

http://feedback.ebay.com/ebaymotors/...ab=AllFeedback

I'm more than willing to put the money up front if that makes the deal easier. I'd estimate the package would be about 8"x8"x24" and weigh about 15 lbs. give or take depending on the packaging. WI to NY probably $40 or there abouts. If you have a PayPal account I'll send you the money right away.
Reply
Old Jun 14, 2009 | 02:51 PM
  #7  
dave mc's Avatar
Member
iTrader: (62)
 
Joined: Jun 2005
Posts: 219
Likes: 2
From: milwaukee
Car: 87gta 88gta 88marovert
Re: WTB: Left rear sub frame 87 IROC

Yes that would make things all good for me I’ll pm you my paypal info.
Reply
Old Jun 14, 2009 | 03:01 PM
  #8  
KnottyBuoyz's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Apr 2009
Posts: 388
Likes: 0
From: Iroquois, ON
Car: 87 IROC-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Not sure, gotta look it up
Deal's done - Mod can close thread

Deal's done. Thnx Dave.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
TA8487
Engine/Drivetrain/Suspension Wanted
1
Aug 16, 2015 12:21 PM
kyleb24
Camaros for Sale
2
Aug 15, 2015 08:24 AM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM




All times are GMT -5. The time now is 06:30 PM.