T5 for v8
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
T5 for v8
HI I am looking for a t5 transmission. I don't need pedals, master/slave or I don't think I will need a drive shaft. Currently, I have a v6 t5 that the p/o put in to mate up with the sbc. W/C I would prefer but not necessary. I will pick up if it's within 200 miles otherwise I can pay for shipping if it's reasonable. A cross member, mechanical speedo and bell housing are a must. Already have clutch kit and flywheel.
thanks,
Ryan
thanks,
Ryan
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: T5 for v8
Whats your price ? whats the mileage? what was it out of exactly? what year? vin code if you have it. Pm me if you want
Junior Member
iTrader: (5)
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: T5 for v8
I have a Non-WC T5 from a 1984 Z28, less than 100K miles. 220.00 takes it. I can meet you halfway - am in NH.
I just posted information about this tranny, based on its original tag, here:
zhttps://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/652954-lots-third-gen-parts.html
Picture of it is here:
https://www.thirdgen.org/forums/memb...t5-tranny.html
I don't know what you mean by cross member, but this is a full tranny, the only thing is that hanger thingy with the rubber part in the pic is not available, just the transmission itself.
PM me if interested.
Cheers,
Shepp
I just posted information about this tranny, based on its original tag, here:
zhttps://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/652954-lots-third-gen-parts.html
Picture of it is here:
https://www.thirdgen.org/forums/memb...t5-tranny.html
I don't know what you mean by cross member, but this is a full tranny, the only thing is that hanger thingy with the rubber part in the pic is not available, just the transmission itself.
PM me if interested.
Cheers,
Shepp
HI I am looking for a t5 transmission. I don't need pedals, master/slave or I don't think I will need a drive shaft. Currently, I have a v6 t5 that the p/o put in to mate up with the sbc. W/C I would prefer but not necessary. I will pick up if it's within 200 miles otherwise I can pay for shipping if it's reasonable. A cross member, mechanical speedo and bell housing are a must. Already have clutch kit and flywheel.
thanks,
Ryan
thanks,
Ryan
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: T5 for v8
What would be half way? Albany? Does that need a rebuild? Is there any play to the input shaft or does it seem pretty solid still. how did she shift prior to taking it out? Would you be against shipping it?
Junior Member
iTrader: (5)
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: T5 for v8
Wow you are out in the west of the state... yeah prolly something like Albany
I can only tell you what I was told (I bought a boat load of parts when I recently bought a 1984 Z28): I don't believe it needs a rebuild, nor that it has been rebuilt, the guy I bought all this stuff from was kind of obsessed, and seemed to buy quality stuff.
The input shaft has very little play, maybe 1/32 of an inch
Neither he nor I have used the transmission - he bought it from someone who took it out of a 1984 Z28 w <100K miles on it (wrecked car apparently), so I cannot tell you how it shifted while in the original car.
Sure I can ship it, but I'd want you to set that up with some transport Co to come pack it and transport to you.
Shepp
I can only tell you what I was told (I bought a boat load of parts when I recently bought a 1984 Z28): I don't believe it needs a rebuild, nor that it has been rebuilt, the guy I bought all this stuff from was kind of obsessed, and seemed to buy quality stuff.
The input shaft has very little play, maybe 1/32 of an inch
Neither he nor I have used the transmission - he bought it from someone who took it out of a 1984 Z28 w <100K miles on it (wrecked car apparently), so I cannot tell you how it shifted while in the original car.
Sure I can ship it, but I'd want you to set that up with some transport Co to come pack it and transport to you.
Shepp
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: T5 for v8
Whats your zip? I will get a shipping quote for the shipment.
Trending Topics
Junior Member
iTrader: (5)
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: T5 for v8
dam dude you got to be kidding me I just told some guy I didnt want his because of it was in Michigan now im out of that deal.
Junior Member
iTrader: (5)
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: T5 for v8
I'm sure you'll land one.
Shepp
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: T5 for v8
well let me know I guess. I was in 100 percent on this I need a trans asap. Any body else got any offers?
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: T5 for v8
i have the trans, flywheel, some of the hydrolics, asking $200
Thread Starter
Member
Joined: Aug 2011
Posts: 118
Likes: 0
From: Genesee County NY
Car: 2001 GMC Sonoma 4.3/ 84 Trans Am
Engine: SBC 355
Transmission: 89 World Class Borg T5
Axle/Gears: 3.42 10 bolt
Re: T5 for v8
Hey ted sorry I got your responses a little late. I ended up rangling one.
Senior Member
iTrader: (7)
Joined: Dec 2007
Posts: 618
Likes: 0
From: Williamstown, NJ
Car: '98 Mustang GT
Engine: '03 4.6L
Transmission: T45
Axle/Gears: DK




