[NY] WTB - AC compressor brace for TPI V belt set up
Thread Starter
Supreme Member
iTrader: (4)
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
WTB - AC compressor brace for TPI V belt set up
I am looking for the brace for the AC compressor thet goes from the top AC bracket to the exhaust manifold stud for a TPI car with the v belts. I am pretty sure 1985 TPI cars had it - possibly 86 and 87. Let me know if you have one to sell.
Last edited by 82tarecaro; Mar 3, 2013 at 01:01 PM.
Joined: Jul 2002
Posts: 1,983
Likes: 6
From: Stamford, New York
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: WTB - AC compressor brace for TPI V belt set up
can you post pics? i have a pile of v-belt tpi complete setup, just don't know what bracket went where.
Thread Starter
Supreme Member
iTrader: (4)
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
Re: WTB - AC compressor brace for TPI V belt set up
I had a tough time trying to find a pic of it. I found it in someone's ad on here. Not the best pic, but you can see it coming off the top AC bracket, going down to the exhaust manifold. It looks like a piece of round stock bent on both ends with mounting holes on either end. It also might have a bend in the middle but I am not positive.
Member
iTrader: (8)
Joined: Dec 2001
Posts: 370
Likes: 0
From: Simi Valley, CA USA
Car: 87' Pont GTA
Engine: 5.7L
Transmission: 700R4
Re: WTB - AC compressor brace for TPI V belt set up
According to your picture I believe this is the one that you are requesting. The price runs $10.00 plus shipping and handling.
Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com
Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com
Trending Topics
Joined: Aug 1999
Posts: 5,261
Likes: 461
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: WTB - AC compressor brace for TPI V belt set up
I don;t have a 85-87 TPI to compare to at the moment,..... but I think this is the right one; It's about 14 inches long. Looks like what Thomas posted above:
Pretty sure it was blasted & re-painted in the group of parts from a previous re-build, but I never re-install AC ! My most recent re-builds were 305 V-Belt.....
$16 shipped.
Pretty sure it was blasted & re-painted in the group of parts from a previous re-build, but I never re-install AC ! My most recent re-builds were 305 V-Belt.....
$16 shipped.
Thread Starter
Supreme Member
iTrader: (4)
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
Re: WTB - AC compressor brace for TPI V belt set up
John - that looks like the one. I will take it. Hopefully I can get it in time to drop it off at the powdercoater with my other parts. I will send you a pm.
Thread Starter
Supreme Member
iTrader: (4)
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
Re: WTB - AC compressor brace for TPI V belt set up
You are right Thomas - I did not realize it - but I could not figure it out from the picture that the curved part went to the exhaust side. John is a little closer to me in the country and I think I can get it from him quicker. I wish I could have figured it out from the pic you posted but I am not using this in a TPI application and I did not have one on hand to reference.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
10
Aug 22, 2015 07:13 PM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM