Need some Quadrajet E4ME springs......
Thread Starter
Member
Joined: Jul 2012
Posts: 197
Likes: 0
From: Middle TN
Car: 1985 Firebird Trans Am
Engine: 305 4bbl
Transmission: 700R4
Axle/Gears: 3.08
Need some Quadrajet E4ME springs......
Please dont laugh at my terminology as I am pulling part names directly from the factory service manual, so if there's a slang term for it please excuse me 
I am in need of the rich authority adjusting spring, the spring that sits in between the fuel bowl insert and the mixture control solenoid, the spring for the MCS adjusting screw, the fuel filter spring, and the spring for the throttle position sensor.
When I pulled my carb apart these springs were all missing except for the rich authority adjusting spring, which was broken and the carcass was laying in multiple places inside my carb
this is all dependent on being able to find these springs at auto parts stores, for instance when I get new sensors those kits *MAY* come with new springs. I will remove parts I no longer need from the list, if any.
Name your price
shipping to 37183

I am in need of the rich authority adjusting spring, the spring that sits in between the fuel bowl insert and the mixture control solenoid, the spring for the MCS adjusting screw, the fuel filter spring, and the spring for the throttle position sensor.
When I pulled my carb apart these springs were all missing except for the rich authority adjusting spring, which was broken and the carcass was laying in multiple places inside my carb
Name your price
shipping to 37183 Junior Member
Joined: Jul 2006
Posts: 15
Likes: 0
From: Silver Spring, MD
Car: 92 Camaro
Engine: 305
Transmission: Tremac
Axle/Gears: its a secret!
Re: Need some Quadrajet E4ME springs......
I have an old GM parts box full of GM 2 and 4 barrel C-3 carbs. I know I have all the springs but will have to wait till the weekend till I pull them out.
My Email is wre46@hughes.net Send me yours and I can send pics of what I have to make sure we get you all the right parts.
My Email is wre46@hughes.net Send me yours and I can send pics of what I have to make sure we get you all the right parts.
Thread
Thread Starter
Forum
Replies
Last Post




