[FL] Looking for an 82-88 liquid line.
Thread Starter
Joined: Jul 2011
Posts: 358
Likes: 91
From: Tampa, FL
Car: 15 Ram, 88 IROC, 92 RS
Engine: 5.0
Transmission: Auto
Axle/Gears: 3.42 (4th Gen)
Looking for an 82-88 liquid line.
As the title says. More than ok if the evap and condenser side of the line are present but seized, I can work with that. Removed the one from my 88, got the seized lines out and then found it was porous at the steel clamp. I have struck out trying to find any type of aftermarket support. The closest I came was a 94-96 Corvette, but the length is difficult to work with.
Joined: Jan 2013
Posts: 97
Likes: 57
From: Michigan
Car: 1992 Trans Am GTA
Engine: L98 5.7L 350
Transmission: 700r4
Axle/Gears: 3.23
Re: Looking for an 82-88 liquid line.
As the title says. More than ok if the evap and condenser side of the line are present but seized, I can work with that. Removed the one from my 88, got the seized lines out and then found it was porous at the steel clamp. I have struck out trying to find any type of aftermarket support. The closest I came was a 94-96 Corvette, but the length is difficult to work with.
Thread
Thread Starter
Forum
Replies
Last Post
