Ignition Setting-Up
Thread Starter
Member
Joined: Oct 2001
Posts: 177
Likes: 0
From: Travis AFB, CA
Car: 05 Nissan Xterra
Engine: 4.0L DOHC
Transmission: 5 Speed Auto w/ OD
Ignition Setting-Up
I'm just about ready to drop the 455 in and hook everything up. It has an HEI distributor (with the coil and module inside the cap),
so I was wondering, what hooks up to the distributor to make it and the coil work?
If you can get any detailed pics of your or someone elses HEI setup, that would help me out alot. I don't know what all I need to hook my ignition up. I don't know what goes where. Please help!
so I was wondering, what hooks up to the distributor to make it and the coil work?
If you can get any detailed pics of your or someone elses HEI setup, that would help me out alot. I don't know what all I need to hook my ignition up. I don't know what goes where. Please help!
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Same as last post on the subject....
Switched 12 V (pink wire) to the Batt terminal, and tach wire to the Tach terminal. That's it. Gotta be the simplest thing to wire that's ever been invented.
Switched 12 V (pink wire) to the Batt terminal, and tach wire to the Tach terminal. That's it. Gotta be the simplest thing to wire that's ever been invented.
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM
Gunner242
Electronics
7
Dec 25, 2015 04:49 PM