every thing needed for 350 swap
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
350 (duh)
knock sensor
PROM from a 350 TBI equipped b-body (caprice, road disaster)
might need bigger injectors (not sure on this- check with someone who knows for sure)
knock sensor
PROM from a 350 TBI equipped b-body (caprice, road disaster)
might need bigger injectors (not sure on this- check with someone who knows for sure)
Supreme Member
Joined: Sep 2001
Posts: 1,266
Likes: 4
From: Tallahassee, FL. USA
Car: 92 Camaro RS
Engine: 350 Crate Motor
Transmission: Tremec TKO
Axle/Gears: 10 Bolt 3.73
More Specifically:
Knock Sensor: #10456288
ESC Module: #16128261
350 Truck Injectors (should be big enough, unless it's cammed big) #17112493 (2 required)
The Caprice (B-Body) chip works for automatics, since yours is a 5 speed (mine too) you should have a custom chip burned.
-Rich-
Knock Sensor: #10456288
ESC Module: #16128261
350 Truck Injectors (should be big enough, unless it's cammed big) #17112493 (2 required)
The Caprice (B-Body) chip works for automatics, since yours is a 5 speed (mine too) you should have a custom chip burned.
-Rich-
Thread
Thread Starter
Forum
Replies
Last Post