Hey guys im new to this site but I had a question that would help me get my car back on the road. I have a jeep with a 82 305 carbt'd. I am almost finished with a TPI from a 91 z28, my injectors are firing but im not getting spark, i have my coil wired up, most of my sensors are hooked up except for oil/fuelpressure switch, and knock sensor, fuel pump relay is not hooked up cause i have inline pump hard wired. all i need my computer to do is run my fuel injection can anyone give any advice on what are the bare essentials that need to be wired up in order for it to work, THANKS!!!!

 

Exerpt from the Board Guidelines:

"Stay on-topic to each specific board/post and discuss Third Generation (1982-1992) F-Bodies (Camaros and Firebirds) only."

Swapping third-gen powertrain components into another vehicle doesn't make it a third-gen.

Cross-posting the same question into three different forums wasn't very productive either.

I'd suggest chevytalk.com which has more general purpose all-things-to-all-people discussions.