please post some time slips of a LT1 swap
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: north carolina
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 04 Dodge SRT-4, 91 formula firebird
Engine: 2.4 L4, 305 tbi
Transmission: 5-speed, 700 r4
please post some time slips of a LT1 swap
I have plans to swap my 91 Firebird's TBI with a LT1 and im curious what some time slips are of some cars that already have this swap. thanks.
#2
Supreme Member
iTrader: (3)
Join Date: Apr 2005
Location: Baton Rouge, LA
Posts: 1,147
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 305
Transmission: th350
Well not many people would go through all the trouble to put a LT1 in and leave it stock. So most if not all the time slips you will get will have alot of suporting mods with the LT1. So when people post there times ask for mods if it isent in there sig and somewhat copy there mods if you are willing to go that far to get as fast.
#3
Supreme Member
actually I think somewhere I still have some timeslips of when I was stock, I think I had 3.42 gears at the time, don't remember. But I know I was running something like 13.7 @ 103-5
I should be good for low 12's now
I should be good for low 12's now
#4
Member
Join Date: May 2005
Location: Ringgold, Ga/ Nashville, TN
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevrolet Camaro
Engine: LT1
Transmission: 700R4
Axle/Gears: 2000 rear, 3.73, auburn locker
When my car had the stock TBI 305, it went 10.7 in the 1/8th mile. Now with a stock LT1, headers, 4 inch exhaust, and the factory one tire fryer 2.73 gear, on 17 inch wheels with street tires went 8.89 at 79mph. I need a gear and tires really bad. The LT1 was not touched internally, it had 103,000 miles on it when the camaro it was in got wrecked and the only thing I replaced other than a tune up was the intake gasket and valve cover gaskets.
Last edited by LT1powered89; 02-19-2006 at 11:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post