please post some time slips of a LT1 swap
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 55
Likes: 0
From: north carolina
Car: 04 Dodge SRT-4, 91 formula firebird
Engine: 2.4 L4, 305 tbi
Transmission: 5-speed, 700 r4
please post some time slips of a LT1 swap
I have plans to swap my 91 Firebird's TBI with a LT1 and im curious what some time slips are of some cars that already have this swap. thanks.
Supreme Member
iTrader: (3)
Joined: Apr 2005
Posts: 1,147
Likes: 0
From: Baton Rouge, LA
Car: 89 RS
Engine: 305
Transmission: th350
Well not many people would go through all the trouble to put a LT1 in and leave it stock. So most if not all the time slips you will get will have alot of suporting mods with the LT1. So when people post there times ask for mods if it isent in there sig and somewhat copy there mods if you are willing to go that far to get as fast.
actually I think somewhere I still have some timeslips of when I was stock, I think I had 3.42 gears at the time, don't remember. But I know I was running something like 13.7 @ 103-5
I should be good for low 12's now
I should be good for low 12's now
Member
Joined: May 2005
Posts: 181
Likes: 0
From: Ringgold, Ga/ Nashville, TN
Car: 1989 Chevrolet Camaro
Engine: LT1
Transmission: 700R4
Axle/Gears: 2000 rear, 3.73, auburn locker
When my car had the stock TBI 305, it went 10.7 in the 1/8th mile. Now with a stock LT1, headers, 4 inch exhaust, and the factory one tire fryer 2.73 gear, on 17 inch wheels with street tires went 8.89 at 79mph. I need a gear and tires really bad. The LT1 was not touched internally, it had 103,000 miles on it when the camaro it was in got wrecked and the only thing I replaced other than a tune up was the intake gasket and valve cover gaskets.
Last edited by LT1powered89; Feb 19, 2006 at 11:53 AM.
Supreme Member
Joined: May 2004
Posts: 2,924
Likes: 1
From: Kingston, Tn
Car: 1987 GTA
Engine: LT1
Transmission: T56
Axle/Gears: 9 bolt 3.70 posi
A buddy of mine is thinking with my GTA 6-speed and 3.70 gear, that I am looking at low 8's, around 8.3-8.4 in the 1/8th
Thread
Thread Starter
Forum
Replies
Last Post






