V6 to327 engine swap
Joined: Sep 2005
Posts: 27,881
Likes: 2,434
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: V6 to327 engine swap
It would be exactly as hard as any other V8 swap, as detailed in all the stickies that you no doubt have already read before posting this extremely redundant question.
Yes it will be fine with a 700; but not the one you have. You'll need a V8 one. Again, as detailed in the stickies, which were designed to prevent this question from being asked over and over like it used to be several times every day.
Yes it will be fine with a 700; but not the one you have. You'll need a V8 one. Again, as detailed in the stickies, which were designed to prevent this question from being asked over and over like it used to be several times every day.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
If the heads are original 327, there is about an 8 to 1 chance they won't have the accessory mount bolt holes on the end of the heads like 3rd gen V8's have. Can make accessory mounting "challenging".
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM