91 3.1 engine swap to carbed 350
Thread Starter
Member
Joined: Mar 2004
Posts: 138
Likes: 0
From: Urbana, Illinois
Car: '91 RS, 1994 Honda Accord LX
Engine: 3.1
Transmission: Automatic
91 3.1 engine swap to carbed 350
I have a 91 with a v6. I'm buying an '82 chevy truck with a rebuilt 350 and automatic transmission. What do I need that won't be in my donor for the swap.
I know I will need v8 springs. What else do I have to have?
I know I will need v8 springs. What else do I have to have?
Senior Member
iTrader: (24)
Joined: Dec 2004
Posts: 712
Likes: 1
From: washington state
Car: 1992 Firebird v6 1992 formula v8
Engine: 3.1, 350 TPI
Transmission: both 700 r4
Re: 91 3.1 engine swap to carbed 350
You will need engine mounts.
Sway bar for a V8 use Ws6 better
Already said springs use WS6
I think that the trucks tranmission is different than a third gen. Torue arm on a third gen. Not sure about the truck.
The swap will be a harder than thought. You car has VATS and you will have to figure out how to bypass it. Look at bypassing the vats prior to the swap to make sure that everything works. Car starts etc.
Sway bar for a V8 use Ws6 better
Already said springs use WS6
I think that the trucks tranmission is different than a third gen. Torue arm on a third gen. Not sure about the truck.
The swap will be a harder than thought. You car has VATS and you will have to figure out how to bypass it. Look at bypassing the vats prior to the swap to make sure that everything works. Car starts etc.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
