engine change need help
Thread Starter
Junior Member
Joined: Mar 2008
Posts: 4
Likes: 0
engine change need help
hi i am wantin to put a 350 small block in my 1983 camaro and it has a 2.8 v6 but i dont know what to do about the trany if it will hold the power or not or if it will even bolt up. so i need help on this one guys
Last edited by jefflawless; Mar 29, 2008 at 06:09 AM.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
Don't worry about the transmission holding up. You'll know why after reading this https://www.thirdgen.org/forums/engi...swap-read.html
Don't worry about the transmission holding up. You'll know why after reading this https://www.thirdgen.org/forums/engi...swap-read.html
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
Aug 12, 2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM
