thoughts on this combo
Thread Starter
Member
Joined: Sep 2005
Posts: 140
Likes: 0
From: Fairchild AFB, Wa/Oviedo FL
Car: 1995 Firebird Formula
Engine: LT1
Transmission: Th350/4k stall
Axle/Gears: 10 bolt with 3.42s
thoughts on this combo
aight guys i wanna build a 383 for my iroc. i was thinking a scat or eagle forged rotating assembly, AFR 195 eliminator heads, cc306 cam, and a stealth ram, with LT's and True duals. i wanna make around 400rwhp. is it capable with this setup or am i way off? any advice will be great
Thanks, Shawn
Thanks, Shawn
Junior Member
iTrader: (1)
Joined: Jan 2008
Posts: 38
Likes: 0
From: Ohio
Car: 82 Camaro
Engine: 3 350's
Transmission: 3 t350
Re: thoughts on this combo
Check this website out..Dont know if it helps you or anything....http://www.ryanscarpage.50megs.com/combos1.html
Thread Starter
Member
Joined: Sep 2005
Posts: 140
Likes: 0
From: Fairchild AFB, Wa/Oviedo FL
Car: 1995 Firebird Formula
Engine: LT1
Transmission: Th350/4k stall
Axle/Gears: 10 bolt with 3.42s
Re: thoughts on this combo
thanks there is alot of good info on that page. from what it looks like my goal of 400 is pretty realistic
Junior Member
Joined: Mar 2007
Posts: 24
Likes: 0
Car: 91 Camaro RS
Engine: 355 Carb
Transmission: T5
Axle/Gears: 3.73
Re: thoughts on this combo
400 hp is easy with a 350, why stroke it? Its cool to say your car has a 383 in it, but it cost a few pennies more. if you want 400 to the rear wheels, plan on swapping a few other parts too. You'll also need subframe connecters.
Thread
Thread Starter
Forum
Replies
Last Post