Question about motor mounts for V8 swap.
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 7
Likes: 0
Question about motor mounts for V8 swap.
So, I decided to swap out the old 2.6L V6 engine from my 1985 Camaro with a 350 Small Block. My question is, what kind of motor mounts do I need to mount it on the Camaro? Are V6 motor mounts different from the 350? What do I have to do to mount it in there? And also, is there a certain crossmember or mount that I need for the tranny? I have a 350 tranny as well.
Member
Joined: Aug 2008
Posts: 428
Likes: 5
From: Auburn, MI
Re: Question about motor mounts for V8 swap.
https://www.thirdgen.org/forums/engi...swap-read.html
Most of the info you need is there.
A Th350 will work. You will need a new driveshaft though, unless you are using a long (9"?) tailshaft model.
Most of the info you need is there.
A Th350 will work. You will need a new driveshaft though, unless you are using a long (9"?) tailshaft model.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Thread
Thread Starter
Forum
Replies
Last Post
86White_T/A305
Third Gen Association of Ontario
0
Sep 21, 2015 05:28 PM
