Golen's Engine Service 383 TPI
#1
Junior Member
Thread Starter
Join Date: Oct 2000
Location: Lynchburg, VA USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Golen's Engine Service 383 TPI
Has anybody tried the Golen's Engine Service 383 TPI? Their website shows a 305 TPI and 350 TPI, but I talked to them on the phone and they also have a 383 TPI for $2750. Should be a direct swap for me, I'd only need larger injectors and a PROM. Just wanted to see if anyone has any experience with these guys.
Thanks!
------------------
1989 Formula WS6 M5
SLP cold air induction, K&N filter, TPIS modified MAF, TPIS 52mm TB w/ airfoil, Random Tech cats, SLP cat-back, TPIS AFPR, March underdrive pulley, Accel 300+ coil & 8.8mm wires, Bosch Platinum+4 plugs, Hypertech 160°F t-stat & fan switch, Hypertech Streetrunner chip, Centerforce dual-friction clutch, PST front suspension kit, PowerStop cross-drilled rotors, Porterfield Carbon Kevlar pads, Russell SS brake lines, Firehawk SZ50 EP P255/50ZR16.
G-Tech Pro measurements:
0-60 mph: 6.0 sec
212 RWHP
1/8 mile track results: 9.74 sec @ 74.5 mph; 0-60 ft @ 2.35 sec; +0.46 reaction
2001 Trans Am WS6 A4
Stock
More info at website:
http://www.fbody.com/members/stevenmh
Thanks!
------------------
1989 Formula WS6 M5
SLP cold air induction, K&N filter, TPIS modified MAF, TPIS 52mm TB w/ airfoil, Random Tech cats, SLP cat-back, TPIS AFPR, March underdrive pulley, Accel 300+ coil & 8.8mm wires, Bosch Platinum+4 plugs, Hypertech 160°F t-stat & fan switch, Hypertech Streetrunner chip, Centerforce dual-friction clutch, PST front suspension kit, PowerStop cross-drilled rotors, Porterfield Carbon Kevlar pads, Russell SS brake lines, Firehawk SZ50 EP P255/50ZR16.
G-Tech Pro measurements:
0-60 mph: 6.0 sec
212 RWHP
1/8 mile track results: 9.74 sec @ 74.5 mph; 0-60 ft @ 2.35 sec; +0.46 reaction
2001 Trans Am WS6 A4
Stock
More info at website:
http://www.fbody.com/members/stevenmh
#3
Junior Member
Thread Starter
Join Date: Oct 2000
Location: Lynchburg, VA USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
They have a website at http://www.golensengineservice.com . The site has the dyno graphs for the 305 and 350 TPI, the 383 TPI isn't on there, but the guy said it makes about 350 HP and 393 ft-lb.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM