2.8 to 3.4 swap
Thread Starter
Member
Joined: Aug 2000
Posts: 247
Likes: 0
From: DOMINICAN REPUBLIC
2.8 to 3.4 swap
Question for you guys, do I need to change my computer to perform this? Or can I just pop in the whole engine and use my 2.8's fuel injection minus injectors, of course.
Also, will it bolt right up with my stock 700r4?
Also, will it bolt right up with my stock 700r4?
Banned
Joined: Mar 2000
Posts: 2,356
Likes: 0
From: Greenville, SC
If I were you I would also post this in the V6 section.
Yes you can use the fuel injection you have and also the tranny.
------------------
1992 Camaro RS 3.1L
T5 Manual 5 speed
Cold/RAM air intake
Z-28 Exhaust
8.5mm MSD Ignition wires
TB Coolant bypass
Kills:
95 (****) Probe GT
94 Mustang GT
91 CRX (dont ask me why he raced me)
2nd Gen Z28 (350) haha to you V8 guys!
1992 RS 305 TBI (good race)
More to come
Yes you can use the fuel injection you have and also the tranny.
------------------
1992 Camaro RS 3.1L
T5 Manual 5 speed
Cold/RAM air intake
Z-28 Exhaust
8.5mm MSD Ignition wires
TB Coolant bypass
Kills:
95 (****) Probe GT
94 Mustang GT
91 CRX (dont ask me why he raced me)
2nd Gen Z28 (350) haha to you V8 guys!
1992 RS 305 TBI (good race)
More to come
Thread
Thread Starter
Forum
Replies
Last Post